Waveshare RP2350-PiZero development board, based on Raspberry Pi RP2350

Description
Waveshare RP2350-PiZero Development Board, Based On The Raspberry Pi RP2350 Dual-core & Dual-architecture Microcontroller, 520KB SRAM And 16MB Onboard Flash Memory, compatible with Raspberry Pi 40PIN GPIO header RP2350-PiZero Development Board

Based On Raspberry Pi RP2350

Onboard DVI interface, TF card slot and PIO-USB port

Board specifications

RP2350-PiZerois a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, with reserved solder pads for PSRAM chip expansion, easy to develop and integrate into products.

• RP2350B microcontroller chip designed by Raspberry Pi in the United Kingdom
• Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz
• 520KB of SRAM, and 16MB of onboard Flash memory, with reserved solder pads for PSRAM chip expansion
• Type-C connector for easier use
• Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
• Supports using as a USB host or device via onboard PIO-USB port
• Onboard TF card slot for reading and writing TF card
• Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• Adapting 5 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 12 × Programmable I/O (PIO) state machines for custom peripheral support

Integrates multiple Interfaces

Onboard DVI interface, PIO-USB port and TF card slot for more possibilities

for reference only, the1.3inch LCD HATand7inch HDMI LCD (H)are Not included

Support C/C++, MicroPython, Arduino IDE

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

* the DVI and PIO-USB functions are only supported in C environment and cannot be used at the same time

dual-core, dual-architecture

The unique dual-core, dual-architecture capability of RP2350B allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment

What\'s On Board

1. RP2350B
   Dual-core and dual-architecture design, up to 150 MHz operating frequency
2. USB Type-C connector
   for programming, USB 1.1 with device and host support
3. PIO-USB port
   for using as a USB host or device via PIO
4. DVI interace (Mini HDMI connector)
   for driving DVI screen with HDMI cable
5. TF card slot
   supports SPI and SDIO interface communication
6. 16MB NOR-Flash

1. PSRAM chip solder pads
   Compatible with mainstream PSRAM chips for user expansion (soldering required)
2. RUN button
   reset button
3. BOOT button
   Press it when resetting to enter download mode
4. Lithium battery header
   PH2.0 header, for connecting 3.7V Lithium battery, allows recharging/discharging the battery
5. 40PIN GPIO header
   Compatible with some Raspberry Pi HATs
6. Debug interface

outline dimensions Resources & Services
Package Content

Weight:0.013 kg

RP2350-PiZero x1