Description
PCIe to MiniPCIe / Gigabit Ethernet / USB 3.2 Gen1 HAT for Raspberry Pi 5, Supports MiniPCIe interface 4G Module, High-speed Networking, Multiple OS support, Raspberry Pi 5 HAT, optional for 4G modulePCIe TO MiniPCIe/GbE/USB3.2 HAT
PCIe to MiniPCIe slot, Gigabit Ethernet, and USB 3.2 Gen1 ports
Designed for Raspberry Pi 5, driver-free, plug and play
Version Options
PCIe TO MiniPCIe GbE USB3.2 HAT+
the PCIe HAT + accessories
SIM7600G-H 4G GbE USB3.2 HAT+
PCIe HAT + SIM7600G-H-PCIE module + accessories
EG25-G 4G GbE USB3.2 HAT+
PCIe HAT + EG25-G mPCIe module + accessories
Module parameters comparison
Onboard MiniPCIe slot, Compatible with SIM7600G-H-PCIE / EG25-G mPCIe series 4G modules
4G moduleSIM7600G-H-PCIEEG25-G mPCIeFrequency bandLTE-FDDB1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28LTE-TDDB34, B38, B39, B40, B41B38, B39, B40, B41WCDMAB1, B2, B4, B5, B6, B8, B19GSM850, 900, 1800, 1900 MHzGNSSGPS, Beidou, GLONASS, GALILEO, QZSSData TransferLTE-FDD150 Mbps (DL) / 50 Mbps (UL)LTE-TDD130 Mbps(DL) / 35 Mbps(UL)130 Mbps(DL) / 30 Mbps(UL)HSPA+42 Mbps (DL) / 5.76 Mbps (UL)WCDMA384 Kbps (DL) / 384 Kbps (UL)EDGE236.8 Kbps (DL) / 236.8 Kbps (UL)296 Kbps (DL) / 236.8 Kbps (UL)GPRS85.6 Kbps (DL) / 85.6 Kbps (UL)107 Kbps (DL) / 85.6 Kbps (UL)Software FeaturesOperating systemWindows / Linux / AndroidCommunication protocolsTCP, IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNSTCP, UDP, PPP, FTP, HTTP, NTP, PING, QMI, NITZ, SMTP, MQTT, CMUX, HTTPS, FTPS, SMTPS, SSL, MMS, FILESMSSupports MT, MO, CB, Text, PDUFirmware upgradeUSB/FOTAUSB/DFOTAHardware SpecificationsSIM card1.8V / 3.0VAntenna interfaceIPEX-1 connector (LTE main antenna + LTE diversity antenna + GNSS antenna)Power supply3V ~ 3.6VForm factorMini-PCIeDimensions50.8 × 31.0 × 5.5 mm51.0 × 30.0 × 4.9 mmOperating temperature-40℃ ~ +80℃ApplicationsApplicable regionsglobal coverageNote: The 4G module is optional, please refer to the Package Content for detailed part list. The above are the supported modules after testing; If you need to use with other modules, please confirm the interface compatibility of your module.Designed for Raspberry Pi 5, HAT+ standard
Onboard PCIe interface for directly connecting to Raspberry Pi 5 via 16PIN cable
* for reference only, please refer to the Package Content for detailed part list
More USB Capability For Raspberry Pi 5
Extends The PCIe Interface To 2x High Speed USB 3.2 Gen1 Ports For Connecting More Peripherals
* for reference only, please refer to the Package Content for detailed part list
Extends 1x Gigabit Ethernet port
Equipped with RTL8153B high-performance Gigabit ETH chip, sinking design of network port, neat and beautiful
network Speed Measurement
Supports Raspberry Pi OS / Ubuntu / OpenWRT, etc., stable
and reliable network speed
Multi-system Support
Supports systems such as Raspberry Pi OS, Ubuntu, OpenWRT, etc.
Global band 4G / 3G / 2G support
LTE Cat-4: up to 50Mbps (uplink) / up to 150Mbps (downlink)
3G (HSPA+): up to 5.76Mbps (uplink) / up to 42Mbps (downlink)
2G (GPRS/EDGE): up to 236.8Kbps (uplink) / up to 236.8Kbps (downlink)
Note: the 4G module such as SIM7600G-H-PCIE or EG25-G mPCIe is required to enable this functionGNSS positioning
Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
Note: the 4G module such as SIM7600G-H-PCIE or EG25-G mPCIe is required to enable this function
Onboard power monitoring chip and EEPROM
Real-time monitoring of power status, supports USB port power control via software
What's On Board
- RTL8153B
USB to Gigabit ETH - VL805
PCIe to USB 3.2 Gen1 HUB chip - INA219
Power monitoring chip - EEPROM
for saving HAT ID and product information - Raspberry Pi GPIO header
for connecting Raspberry Pi 5 - MiniPCIe slot
for connecting the 4G module with MIniPCIe interface - 16PIN PCIe interface
for connecting to the PCIe interface of Raspberry Pi 5
- Type-C interface
for 4G networking of Raspberry Pi or PC via USB cable, firmware updating, or external power supply input - Nano SIM card slot
for installing Nano-SIM card - Gigabit Ethernet port
up to 1000Mbps data rate, compatible with 100Mbps - USB 3.2 Gen1 expanded ports
USB1~USB2 - DIP switchs
for switching to use GPIO D6 pin to control power ON/OFF of the module and switching the module USB signal output direction - NET indicator
Module Network status indicator - PWR indicator
Power indicator
Pinout definition
How to Install
* for reference only, theRaspberry Pi 5andActive Coolerare not included.
Application Scenarios
Industrial Routers, Home Gateways, Set Top Boxes, Industrial Laptops, Consumer Laptops, Industrial PDAs, Rugged Industrial PCs, And Digital Signage...
Outline dimensionsResources & ServicesPackage Content
Weight:0.09 kg
PCIe TO MiniPCIe GbE USB3.2 HAT+
- PCIe TO MiniPCIe GbE USB3.2 HAT+ x1
- 16P-Cable-40mm cable x1
- Network cable ~1.5m x1
- Screws pack x1
1234SIM7600G-H 4G GbE USB3.2 HAT+
- PCIe TO MiniPCIe GbE USB3.2 HAT+ x1
- SIM7600G-H-PCIEx1
- 16P-Cable-40mm cable x1
- Network cable ~1.5m x1
- Screws pack x1
- Antenna 2pcs x1
- Passive GPS antenna x1
- SMA to IPEX-1 cable 3pcs x1
12345678EG25-G 4G GbE USB3.2 HAT+
- PCIe TO MiniPCIe GbE USB3.2 HAT+ x1
- EG25-G-mPCIex1
- 16P-Cable-40mm cable x1
- Network cable ~1.5m x1
- Screws pack x1
- Antenna 2pcs x1
- Passive GPS antenna x1
- SMA to IPEX-1 cable 3pcs x1
12345678
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.