Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4 Same Size as CM4

DESCRIPTION
Nano Base Board (A) For Raspberry Pi Compute Module 4, Same Size As The CM4Nano Base Board (A) For CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Same Size As The CM4

Standard CM4 Socket, With Multiple Peripheral Interfaces, Suitable For Narrow Application Environment

Note: the CM4 is NOT included. Please buy it separately if necessary.SpecificationsCM4 SOCKETsuitable for all variants of Compute Module 4CONNECTORRaspberry Pi 40PIN GPIO interface × 1USBUSB 2.0 Type A interface × 1CAMERAMIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)STORAGEMicro SD card socket for Compute Module 4 Lite (without eMMC) variantsPOWER INPUT5VDIMENSIONS55 × 40mmWhat\'s On Board

1. CM4 socket
   suitable for all variants of Compute Module 4
2. Power supply / Programming
   5V power supply, or used for eMMC burning
3. Micro SD card slot
   for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
4. CSI interface
   1 × MIPI CSI camera interface
5. USB2.0 interface
   for connecting sorts of USB devices

1. 40PIN GPIO interface
   suitable for connecting to various HAT modules
2. PWR indicator
   CM4 power status
3. ACT indicator
   CM4 working status
4. AMS1117-3.3
   
5. BOOT switch
   ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
   OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)

Outline DimensionsResources & ServicesWIKI:CM4-NANO-A

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

What\'s The DifferencesCM4 BASE BOARDINTERFACE COUNT AND SPECIFICATIONSPOEGIGABIT
ETH40PIN
HEADERPOWER
INPUTFEATURES
NANO A√2.0×1×15VCM4 sized
NANO B×1√2.0×1×1×1×15VCM4 sized
DUINOM.2 M2.0×1×1×15VArduino compatible
MINI BASE A×1√M.2 M2.0×4×1×2×25V5Vmini size
MINI BASE B×1√M.2 M2.0×4×1×2×2√5V5Vmini size
TOUCH SCREEN×1M.2 M2.0×4×1×15VIPS screen
BINOCULAR CAMERA×1√M.2 M2.0×4×25Vdual 8MP
cameras
4CH RS485×1M.2 M2.0×2×1×2×15V7-36Vdual ETH
DUAL GIGABIT style=\"box-sizing: border-box;\">IOT DUAL GIGABIT ETH×2√3.0×2×1×2×2√5/12V5V5G/4G support
IOT support
RS232
RS485
ADC
POE BASE style=\"box-sizing: border-box;\">RS485
POE style=\"box-sizing: border-box;\">RASPBERRY PI style=\"box-sizing: border-box;\">WIRELESS BASE×1M.2 B /
7-36V5G/4G support
RS485
CAN
rail-mount
7″ ALL-IN-ONE×1M.2 M2.0×4used×1used√5/12V
used7-36Vtouch screen
camera
speakerNOTE① USB 3.0 is equivalent to USB 3.2 Gen1
② There\'s PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).
PACKAGE CONTENT

Weight:0.014 kg

1. CM4-NANO-A x1
2. 2*20PIN color-coded straight pinheader x1

12