Description
Industrial Modbus RTU mixed input and output module, multiple isolation protection circuits, supports voltage and current acquisition, Rail-Mount PC flame-retardant protective case, DC 7V ~ 36V Wide Voltage Power SupplyIndustrial Modbus RTU mixed
input and output module
2-ch Relay Outputs, 2-ch Digital Inputs, 2-ch Analog Current Outputs,
2-ch Analog Current/Voltage Inputs
Modbus RTU Protocol | Multiple protection circuits | 7V ~ 36V Wide Voltage
Features
The Modbus RTU Module (A) is an industrial standard mixed input and output module, supports 2-ch relay outputs, 2-ch digital inputs, 2-ch analog current outputs, and 2-ch analog current/voltage inputs. Adopts Modbus RTU protocol with built-in protection circuits such as power isolation, magnetical isolation, resettable fuse, and TVS.
- Supports 7V ~ 36V wide voltage power supply, configurable device address (1 ~ 255), multi devices can be cascaded on RS485 bus
- Supports power isolation and magnetical isolation, enabling power and signal dual isolation for communication, with high reliability and strong anti-interference capability
- Onboard resettable fuse and TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, provides over-current/over-voltage proof, lightningproof & ESD protection
- Supports passive and active digital input, with bi-directional optocoupler isolation, built-in debouncing algorithm. The relays support digital input linkage control or toggle control
- Supports 12-bit high-precision acquisition with multiple range input modes, supports single-ended/differential input, supports voltage and current simultaneous acquisition
- Adopts high-precision resistors and zero-drift high-precision operational amplifier for more accurate data output or acquisition
- High quality relay, contact rating: ≤10A 250V AC or ≤10A 30V DC
- Rail-mount PC flame-retardant case design, easy to install and safer to use
- 3 × LEDs for indicating the MCU status and signal transceiving status
SpecificationsPower Supply7V ~ 36VCommunication InterfaceRS485Baud Rate4800, 9600, 19200, 38400, 57600, 115200, 128000, 256000Default Communication Format9600, N, 8, 1Modbus ProtocolStandard Modbus RTU protocolRS485 Address1 ~ 255Relay OutputRelay Channels2-chContact Form1 NO, 1 NCContact Rating≤10A 250V AC or ≤10A 30V DCAnalog OutputOutput Mode2-ch current outputResolution12-bit, 1μARange0 ~ 20mAOutput Accuracy±0.03mADigital InputDigital Input Channels2-chActive Input5V ~ 36V DCInput TypePassive input / Active input (NPN or PNP Type)Isolation TypeBi-directional optocouplerAnalog InputAnalog Input Channels2-chRange0 ~ 10V/2 ~ 10V
0 ~ 20mA/4 ~ 20mASampling Accuracy12-bit resolution, accuracy ≤3‰Data Update Rate31HzCurrent Sampling Resistor249ΩLED IndicatorsSTA: MCU indicator, keeps flashing when the MCU normally working
TXD: TX indicator, lights up when sending data
RXD: RX indicator, lights up when receiving data
Primary function
Supports sending Modbus RTU protocol commands via RS485
for digital and analog input/output
Industrial Grade Isolated Protection
Onboard power and signal dual isolation for RS485 communication, provides stable isolation voltage, features high reliability and strong anti-interference performance. Built-in TVS (transient voltage suppression tube) can effectively suppress the surge voltage and transient peak voltage in the circuit, lightningproof & ESD protection. Built-in resettable fuse and protection diode, provides over-current and over-voltage proof, improves shock-proof performance, suitable for industrial environments with high requirement.
Interface introductionRelay connection
Contact rating of the onboard relay up to 10A 250V AC or 10A 30V DC
Directly controlling 220V AC home appliances, or devices below 30V DC
Industrial High-precision Analog Output
2-ch Analog Output, 12-bit High-precision DA Conversion
Digital Input
Supports passive (dry contact) and active (wet contact) digital input,
with bi-directional optocoupler isolation
Supports voltage/current acquisition,
Wider Measurement range
Onboard analog acquisition interfaces, voltage/current acquisition is switchable via jumper. Multiple Ranges Configurable via Software
Interfaces & Indicators
With Multiple LED Indicators, Easy To Monitor The Operating Status
Rail-Mount Support
Rail-mount PC flame-retardant case, easy to install, and safer to use
Product Show
DimensionsPackage Content
Weight: 0.168 kg
The power supply of this product is not included, it is recommended to purchase 12V power supply if you need it.
- Modbus RTU Module (A) x1
- Screwdriver x1
12
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.