Description
Warning: This product is for lawful development, educational, research, and industrial purposes only. Unauthorized CAN bus access for hacking, tampering, unauthorized unlocking or function hijacking is illegal. Users shall be solely liable for all legal responsibilities and incident consequences. We strictly prohibit such actions and will not provide any tech support.Industrial ESP32-S3 Control Board with 2-Ch CAN communication interfaces, supports Wi-Fi / Bluetooth, built-in power isolation and digital isolation protection circuitsIndustrial ESP32-S3 Control Board
With 2-Ch CAN Interfaces
Based on ESP32-S3, Supports Wi-Fi / Bluetooth, Onboard 2-Ch CAN interfaces
Built-in protection circuits such as power isolation and digital isolation,
Safe & Stable & Reliable
Features at a glance
- Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz
- Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication, with superior RF performance
- Onboard 2-ch isolated CAN interfaces for easy access to various CAN devices
- Onboard pin header for connecting external devices
- Onboard USB Type-C port for power supply, firmware downloading and debugging
- Onboard power supply screw terminal, supports 7V ~ 36V wide voltage input, suitable for industrial applications
- Onboard RTC chip, supports scheduled tasks
- Onboard digital isolation to prevent interference from external signal
- Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply is required for the isolated terminal
- Onboard CAN status indicators for monitoring the operating status of the device
- Rail-mounted protective case, easy to install, safe to use
Version options
ESP32-S3-CAN-2CH
Uses the onboard antenna by default
ESP32-S3-CAN-2CH-U
With SMA antenna connector, uses the external antenna by default
ConfigurationUses the onboard antennaUses an external antenna via the SMA connectorMicrocontrollerESP32-S3 (Default module: ESP32-S3R8, customizable for other modules)Wireless communication2.4GHz WiFi (802.11 b/g/n), Bluetooth 5 (LE)USBConnectorUSB Type-CPower supply5VFunctionsPower supply, USB communication, firmware downloading, etc.ISOLATED CANConnectorScrew terminalCommunication ProtocolsSupports CAN 2.0A / CAN 2.0B with up to 1Mbps communication rateProtectionTVS diode, surge protection & ESD protectionResistorOnboard reserved 120R matching resistor, NC by default, enabled via jumperLED indicatorsPWR indicatorRed power indicator, lights up when powered via USB or an external power supplyCAN_1Green/blue indicators, blink during data transmissionCAN_2power supply Screw terminalVoltage range7V ~ 36VAppearanceEnclosureRail-mount protective caseDimensions91.6 × 23.3 × 58.7 (mm)
Based on ESP32-S3, Designed
for AIoT market
Equipped with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz, with Powerful AI Computing Performance and Security Encryption Mechanism; Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication
Onboard multiple isolation protection circuit
Multiple protections, more safe and reliable
Application Scenario
Allows users to access the relevant webpage via a mobile phone or PC browser to control the device and send data
Supports ESP-IDF, Arduino
Comprehensive SDK, Dev Resources, And Tutorials To Help You Easily Get Started
Application Examples
Provides demo code for IoT connectivity by integrating communication interfaces with a web page, enabling data visualization services
Interface DescriptionTop Terminal Block DescriptionBottom Terminal Block DescriptionPower Supply TerminalPower positive: DC 7V ~ 36VCAN_1 TerminalH signal pinPower negativeType-Cfor power supply, firmware download, and USB communicationL signal pinSH1.0GNDGround (GND)CAN_2 TerminalH signal pin3V33.3V power outputGPIO2Adapting ESP32-S3 I/O pinL signal pinGPIO1Adapting ESP32-S3 I/O pinWhat's On Board
- ESP32-S3
up to 240MHz operating frequency, with 2.4GHz Wi-Fi and BLE - LED indicators
PWR: Power indicator
CAN_1: lights up green when the CAN_1 port sends data; lights up blue when the CAN_1 port receives data
CAN_2: lights up green when the CAN_2 port sends data; lights up blue when the CAN_2 port receives data - ESP32 BOOT button
- ESP32 RESET button
- Power supply isolation
Provides stable isolated voltage, no extra power supply is required for the isolated terminal - CAN_1 matching resistor
Onboard reserved 120R matching resistor, enabled via jumper - CAN communication terminal
for connecting external CAN devices - CAN_2 matching resistor
Onboard reserved 120R matching resistor, enabled via jumper - CAN transceiver chip
- Digital isolation
prevents interference from external signal - 16MB Flash
- IPEX 1 connector
for the ESP32-S3-CAN-2CH-U version, connects an external antenna via the SMA connector
- Onboard ceramic antenna
for the ESP32-S3-CAN-2CH version, uses the onboard antenna - RTC Batt header
for connecting rechargeable RTC Batt (SH1.0) - USB Type-C port
for device power supply, firmware downloading and USB communication - Power supply screw terminal
supports DC 7V ~ 36V wide voltage input - Pin header (2.0mm pitch)
for connecting to other functional modules - DC-DC power module
supports up to 3.3V 2A output - TVS diode (Transient Voltage Suppressor)
Effectively suppresses surge voltage and transient spike voltage in the circuit - ME6217C33M5G
Low dropout regulator, 800mA output (Max.) - CAN transceiver chip
- DC-DC power chip
- XL2515QF20
CAN controller - PCF85063 RTC chip
Enclosure Design
Protection case with 35mm rail-mount support, easy to install, safe to use
Outline dimensionsPackage Content
Weight: 0.075 kg
ESP32-S3-CAN-2CH
- ESP32-S3-CAN-2CH x1
- SH1.0 4PIN cable ~150mm x1
- Screwdriver x1
123ESP32-S3-CAN-2CH-U
- ESP32-S3-CAN-2CH-U x1
- Antenna x1
- SH1.0 4PIN cable ~150mm x1
- Screwdriver x1
1234
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.