Waters Millipore System Interface Module SYS. INT. MOD. SIM For Lab Pump
$90.00

Waters Millipore System Interface Module SYS. INT. MOD. SIM For Lab Pump
The Waters System Interface Module (SIM or System Interface Module) is a legacy hardware interface used to collect and transfer detector signals (e.g., UV/Vis) to chromatography data workstations. It served as a vital bridge between older HPLC detectors and modern data processing software.
Specifications:Hardware Compatibility: Designed to integrate detectors (such as the Waters 484, 490E, and 2487 series) and autosamplers (like the 712 Millipore WISP) into workstation computers (e.g., Millennium32 or early Empower).A/D Conversion: Features individual analog-to-digital (A/D) converters for high-resolution signal digitization (up to 24-bits on newer e-SAT/IN modules).Signal Input Range: Accepts analog signals ranging from -0.25V to +2.25V.Sampling Rates: Features highly scalable data rates, supporting from 1 to 20Hz for standard HPLC and extending up to 480 samples/sec depending on line frequency optimization.Communication Interface: Connects to data systems via IEEE-488 (GPIB) or Ethernet interfaces.
Location: (C-19-D)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.