Works for both above‑ground and in‑ground pools up to 2150 sq. ft.
WYBOT – Quick FAQ
🔵 1. Unit won\'t turn on / Red light on
Cause: Blocked impeller, low battery, or motor protection triggered.
Fix: Clean the impeller, ensure water depth > 0.5m, and restart the unit.
🔵 2. Won\'t charge / Charging light flashes
Cause: Dirty charging port or poor connection.
Fix: Clean the charging contacts with a dry cloth or isopropyl alcohol. Reconnect the charger.
🔵 3. Won\'t climb walls / Poor wall performance
Cause: Smooth surfaces (tile, mosaic, fiberglass) or missing floating kit.
Fix: Install the floating kit (contact us if missing). Adjust cleaning mode via app.
🔵 4. Unit only cleans part of the pool
Cause: Wrong cleaning mode, clogged filter, or outdated firmware.
Fix: Change mode in app, clean the filter basket, and update firmware via app.
🔵 5. App won\'t connect to the unit
Cause: Unit is in the water (Bluetooth does not work underwater).
Fix: Take the unit out of the pool, place it on land, and reconnect via app.
🔵 6. Unit starts but stops quickly / Grinding sound
Cause: Low battery voltage or mainboard issue.
Fix: Fully charge for 6–8 hours. If still fails, hold the power button for 10 seconds to reset. Contact support if not resolved.
🔵 7. Charging LED stays flashing green
Normal: Flashing green = charging.
When fixed: Solid green = fully charged. If it never turns solid, check charger or port.