WS2812 8 Bit RGB LED Stick 5050 RGB LED with Integrated Drivers for Arduino R...
$11.03

Description:
Voltage:5V
Intelligent reverse connect protection, the power supply reverse connection does not damage the IC
The control circuit and the LED share the only power source
Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point
Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate
Built-in electric reset circuit and power lost reset circuit
Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s
Cascading port transmission signal by single line
Any two point the distance more than 5m transmission signal without any increase circuit
When the refresh rate is 30fps, cascade number are not less than1024 points
Send data at speeds of 800Kbps
The color of the light were highly consistent, cost-effective
Wattage:0.7W Applications
Full-color module, Full color soft lights a lamp strip
LED decorative lighting, Indoor/outdoor LED video irregular screen Package Includes:
1 X 8bits WS2812 5050 RGB LED ModuleVoltage: DC5V
Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s
Communication interface: Single-wire communication, each pixel is individually addressable
Application: Full-color module, Full color soft lights a lamp strip, LED decorative lighting, Indoor/outdoor LED video irregular screen
What you will get: 1 X 8 Bit WS2812 5050 RGB LED Module

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.