WEIDMULLER 1020200000 WDU 6 Terminal Block
$7.23

WEIDMULLER 1020200000 WDU 6 Terminal BlockVersion Feed-through terminal block, Screw connection, dark beige, 6 mm², 41 A, 800 V, Number of connections: 2 Order No. 1020200000 Type WDU 6 GTIN (EAN) 4008190163440
Depth 46.5mm Depth (inches) 1.831inch Depth including DIN rail 47mm Height 60mm Height (inches) 2.362inch Width 7.9mm Width (inches) 0.311inch Net weight 12.75gStorage temperature -25 °C...55 °C Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity Continuous operating temp., min. -60°C Continuous operating temp., max. 130°CRoHS Compliance Status Compliant without exemption REACH SVHC No SVHC above 0.1 wt%Material Wemid Colour dark beige UL 94 flammability rating V-0Certificate No. (ATEX) DEMKO14ATEX1338U Certificate No. (IECEX) IECEXULD14.0005U Max. voltage (ATEX) 690 V Current (ATEX) 41 A Wire cross section max. (ATEX) 10 mm² Max. voltage (IECEX) 690 V Current (IECEX) 41 A Wire cross section max. (IECEX) 10 mm² Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity Marking EN 60079-7 Ex eb II C Gb Ex 2014/34/EU label II 2 G DVersion Screw connection, for screwable cross-connection, One end without connector End cover plate required Yes Number of potentials 1 Number of levels 1 Number of clamping points per level 2 Number of potentials per tier 1 Levels cross-connected internally No PE connection No Rail TS 35 N-function No PE function No PEN function NoCross-section for connected wire, solid, two clampable wires, max. 2.5mm² Cross-section for connected wire, solid, two clampable wires, min. 0.5mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 2.5mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min. 0.5mm² Wire connection cross section, finely stranded, two clampable wires, min. 0.5mm² Wire cross-section, finely stranded, two clampable wires, max. 2.5mm²Explosion-tested version Yes Number of similar terminals 1 Open sides right Type of mounting Snap-onCertificate No. (CSA) 200039-1057876 Current size C (CSA) 50 A Voltage size C (CSA) 600 V Wire cross section max. (CSA) 8 AWG Wire cross section min. (CSA) 22 AWGConnection type, additional connection Screw connectionBlade size 0.8 x 4.0 mm Clampable conductor Connection specification Screw connection Cross-section for conductor connection Type solid, H05(07) V-U min. 0.5 mm² max. 10 mm² nominal 6 mm² wire end ferrule Stripping length min. 12 mm max. 12 mm nominal 12 mm Tightening torque min. 0.8 Nm max. 1.6 Nm Connection specification Screw connection Cross-section for conductor connection Type stranded, H07V-R min. 1.5 mm² max. 10 mm² nominal 6 mm² wire end ferrule Stripping length min. 12 mm max. 12 mm nominal 12 mm Tightening torque min. 0.8 Nm max. 1.6 Nm Connection specification Screw connection Cross-section for conductor connection Type flexible, H05(07) V-K min. 0.5 mm² max. 10 mm² nominal 6 mm² wire end ferrule Stripping length min. 12 mm max. 12 mm nominal 12 mm Tightening torque min. 0.8 Nm max. 1.6 Nm Clamping range, max. 10mm² Clamping range, min. 0.22mm² Clamping screw M 3.5 Connection cross-section, stranded, max. 10mm² Connection cross-section, stranded, min. 1.5mm² Connection direction on side Gauge to IEC 60947-1 A5 Number of connections 2 Stripping length 12mm Tightening torque, max. 1.6Nm Tightening torque, min. 0.8Nm Torque level with DMS electric screwdriver 3 Twin wire-end ferrules, max. 4mm² Twin wire-end ferrules, min. 0.5mm² Type of connection Screw connection Wire connection cross section AWG, max. AWG 8 Wire connection cross section AWG, min. AWG 26 Wire connection cross section, finely stranded, max. 10mm² Wire connection cross section, finely stranded, min. 0.5mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 6mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 0.5mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 6mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.5mm² Wire connection cross-section, solid core, max. 10mm² Wire connection cross-section, solid core, min. 0.5mm²Rail TS 35 Standards IEC 60947-7-1 Wire connection cross section AWG, max. AWG 8 Wire connection cross section AWG, min. AWG 26Rated cross-section 6mm² Rated voltage 800V Rated DC voltage 800V Rated current 41A Current at maximum wires 57A Standards IEC 60947-7-1 Volume resistance according to IEC 60947-7-x 0.78mΩ Rated impulse withstand voltage 8 kV Power loss in accordance with IEC 60947-7-x 1.31W Pollution severity 3Certificate No. (UR) E60693 Conductor size Factory wiring max. (UR) 8 AWG Conductor size Factory wiring min. (UR) 22 AWG Conductor size Field wiring max. (UR) 8 AWG Conductor size Field wiring min. (UR) 22 AWG Current size C (UR) 50 A Voltage size C (UR) 600 VETIM 6.0 EC000897 ETIM 7.0 EC000897 ETIM 8.0 EC000897 ETIM 9.0 EC000897 ECLASS 9.0 27-14-11-20 ECLASS 9.1 27-14-11-20 ECLASS 10.0 27-14-11-20 ECLASS 11.0 27-14-11-20 ECLASS 12.0 27-14-11-20 ECLASS 13.0 27-25-01-01 ECLASS 14.0 27-25-01-01Approvals ROHS Conform UL File Number Search UL Website Certificate No. (UR) E60693 Certificate No. (cURusEX) E184763

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.