|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
W3002 Digital Temperature Controller Thermostat LED Sensor Probe AC 110V 220V
$117.49

🌡️ W3002 Digital Temperature Controller — LED Thermostat with Waterproof ProbeCompact digital temperature controller designed for accurate heating or cooling control in aquariums, ornamental fish systems, liquid-temperature projects, incubators, and general DIY temperature regulation. The W3002 features a clear LED display, simple 3-button setup, and a 1 meter waterproof NTC 10K probe with a convenient 2P plug for easy replacement.It is a practical choice for users who want a simple thermostat module that can switch a compatible load based on a freely adjustable start temperature and stop temperature.🔧 Key Features 📏 Wide Temperature Range: measures and controls from -50°C to 110°C 🎯 High Precision: measurement accuracy ±0.2°C, control precision ±0.1°C 💡 Clear LED Display: large digital readout for easy visibility 🧠 Dual Work Modes: supports both Heating and Cooling 🔌 Easy to Use: 3-button interface for start temp, stop temp, calibration, and delay settings 🌊 Waterproof Probe Included: suitable for water and other non-corrosive liquids 🔄 Replaceable Sensor: 2P plug-style sensor connection for easy sensor replacement🆚 Work Mode Difference (read before setup)Heating Mode Logic: Start Temperature < Stop Temperature Use when: You want the controller to power a heater or warming device when temperature is too low. Why pick it: Best for heating applications such as incubators, heat mats, warm-water control, and enclosure heating.Cooling Mode Logic: Start Temperature > Stop Temperature Use when: You want the controller to power a cooling device when temperature is too high. Why pick it: Best for fan cooling, aquarium cooling, refrigeration-style control, and temperature reduction projects.Need to warm something up? Use Heating Mode. Need to cool something down? Use Cooling Mode.⚙️ Shared Features Display: bright LED temperature readout Sensor: NTC 10K waterproof probe, approx. 1 meter cable Controls: 3-button adjustment interface Functions: start temp, stop temp, temperature correction, delay start, factory reset Use Case: heating or cooling control based on measured temperature📐 Key Specifications Temperature Measurement Range: -50°C to 110°C Temperature Control Range: -50°C to 110°C Temperature Measuring Accuracy: ±0.2°C Temperature Control Precision: ±0.1°C Sensor Type: NTC10K waterproof probe Sensor Length: approx. 1 meter Sensor Connector: 2P plug Controller Size: 60 × 45 × 31 mm Input Power: according to the selected version / installation requirement Output Power: according to the selected version / installation requirement🧠 Quick Selection Guide Need a simple thermostat for a water-related project? This model is a strong fit. Need a probe that is easy to replace? The included 2P plug sensor makes that easier. Need both heating and cooling capability? This controller supports both, depending on how you set start and stop temperatures. Need to monitor corrosive chemicals? Choose a different probe and controller system designed for that use.🧰 Typical Uses Aquaculture and aquarium systems Ornamental fish temperature control Water and non-corrosive liquid temperature projects DIY incubators and heated enclosures Cooling fan trigger control General thermostat automation tasks🎛️ Basic Setup Guide Set the Start Temperature: press the upper button once to view it, then hold the upper key for about 3 seconds until the value flashes; adjust with the up/down keys.Set the Stop Temperature: press the lower button once to view it, then hold the lower key for about 3 seconds until the value flashes; adjust with the up/down keys.Restore Factory Settings: with power on, hold both the upper and lower keys together until the display shows 888; the controller then returns to default settings.🔌 Wiring & Safety Match the controller wiring and supply to the exact version / voltage you are installing. Use the included probe only with water or other non-corrosive liquids and suitable temperature-monitoring applications. Make sure the connected load is electrically compatible with the controller output. Install in a protected location and keep mains-voltage wiring isolated and secure. If you are switching inductive or high-inrush loads, use proper protection and appropriate external switching hardware if required.⚠️ Important Notes If you set the temperature values backwards in heating mode, the output indicator may stay off and the load may not work correctly. This controller is intended for temperature control, not as a general sensor display only. Always test the setup before final installation in a live system. For best long-term reliability, avoid moisture exposure to the controller body itself; only the probe is intended for wet measurement environments.📦 Package Includes 1 × Digital Temperature Controller Thermostat 1 × NTC Thermistor Temperature Sensor Waterproof Probe Cable💥 Volume Discount — Buy More & Save• 10% OFF when you buy 2 units• 15% OFF when you buy 3 units• 20% OFF when you buy 4 or more units Discount auto-applied.🇺🇸 Premium Support & Shipping• US Stock / Fast Shipping — 2–4 day delivery from Oklahoma, USA. Your purchase supports a US-based small business.• 🧪 Quality Checked & Tested — spot-checked before shipping.• 🔁 Easy Returns — 30-day returns; we pay return shipping.• 📦 Professional Packaging — safe delivery, 100% guaranteed.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|