|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Voltage Monitor Module, DC 0-99.9V Relay Controller Board for Overvoltage Underv
$31.99

Voltage Monitor Module, DC 0-99.9V Relay Controller Board for Overvoltage Undervoltage Control Voltage Detection Product description Voltage Monitor Module, DC 0-99.9V Relay Controller Board for Overvoltage Undervoltage Control Voltage Detection Voltmeter display range DC 0-99.9 V Voltage detection error: ± 0.1V Working current 8mA/24V (relay open, LED display OFF about 4mA/24V ); 58mA/24V(relay close) Operating Power DC6~80V (72V battery full charge voltage approx 85V, unavailable) Relay parameters A set of conversion (normally open and normally close, NO/NC) Contact load NO: 30A/250V AC or 30A/30V DC, continuous working current 20A maximum Contact load NC :20A/250V AC or 20A/30V DC . Inductive load current reduced to 1/4 Attention Because high voltage DC electric arc damages relay contact, so the electric load above DC50V load current is less than 10A. Contact resistance ≤ 100mΩ (1A 6VDC) Mechanical durability 10 millions Electricity durability: > 100,000 (20A-250VAC) Operating Temperature -40 ~ 85 ℃ Set display off the minimum current value is 4mA/24V (relay open) The pre-set parameters The pre-set parameters can be saved after power off. - Digital display DC voltage detection, control the relay output.
- DC 6~80V relay interface board with 2 buttons for easy operation. With clear LED display, convenient to check the value.
- Adjustable Voltage Detection Range: DC 0~99.9V.
- When the measured voltage is lower than the lower limit or higher than upper limit value, the relay works. Can be used for voltage detection switch, battery over/under voltage protector or discharge meter. Comes with a cover for protection.
- Connector Type Quick Connect Contact Type Normally Open Current Rating 0.01 A Mounting Type Surface Mount Operation Mode Manual Wattage 3.53 watts Coil Voltage 6 volts_of_direct_current Contact Current Rating 58 milliamps Minimum Switching Voltage 6 volts_of_direct_current Specification Met A30-conc-001 Contact Material Cable Number of Packs 1 Unit Count 1 Count Number of Items 1 Included Components 1PCS Module Part Number A30-Conc-001
Shipping - Fast shipping is very important for us.
- Our standard US shipping service is FREE.
- Your order will be shipped within 2-3 business days upon full payment received.
- Your order will be delivered within 2-3 business days after the handling time.
- We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time.
- We are not responsible for undeliverable addresses.
Returns and payment - We offer a 30 days return policy from checkout winning date.
- We allow only PayPal as payment method
response - Your response very important to us, after you get your package and you are satisfied with our serviceplease leave us positive response
- If you have any problem with your order / any questions please before leave any type of response
For any questions, using contact system Please visit our store to check out other items for sale!Thank you for shopping at our store.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|