ViewTool Ginkgo2 Mini USB to I2C/ADC/GPIO Adapter Win/linux/Mac/Android/RasPi

Typical Applications:- I2C device (play master or slave role) or chip control and debugging
- Sensors with I2C interface application or testing
- I2C EEPROM data reading and writing
- Power management chips with PMBus/SMBus interface control
- USB to serial port/TTL
- Analog voltage measurement and GPIO input or output control, DAC interfaceFeature:- Support Linux, MAC OS, Windows
- Support Android, Raspberry Pi
- USB bus power supply; 5V and 3.3V output; max current 500mA; short circuit protection
- Support I2C Host/Master mode and Slave mode
- Support PMBus and SMBus
- Lots of open source software examples (Crossing multiple OS with multiple languages)
- Support USB-SDI12, USB-EasyScale, USB-UART, PWM, ADC/DAC, GPIO and others
- Multiple USB-I2C adapter can work in one PC at the same time (up to 100)
- The firmware can free update or change (such as CAN/SPI, if used for CAN, need one can driver module connected) by bootloader program
- Supply API (Application Programming Interface) for user further development on crossing-platform and multiple languages supported applications
- Available for customization of hardware, silkscreen, firmware, driver and appliation software, hardware customization MOQ 100, software customization MOQ 10Performance:- USB 2.0;bus-powered
- Portable size
- 1 channels Hardware(standard) mode I2C protocol up to 1.2M
- 2 channels GPIO (software) mode I2C protocol up to 400K
- 4 channels ADC (12bit)
- 2 channels DAC。
- 5 channels GPIO outgoing control
- 1 channels Pulse counter input
- 1 channels UART can output RS485 signal (DE); max baud rate up to 2.25Mbps
- 2 channels PWM signal output; frequency range: 1Hz to 20MHz
- Above peripheral may be or may not be used simultaneuously as pinout limitation
- Safe voltage: 0~5V
- I2C bus working voltage range is 2~5V which is connected to external pull-up resistors
- Item Size: 66.5mm×20.5mm×8.5mm; Weight: 9g
- Temperature range: -40℃～85℃