Velleman K8055N USB I/O PC Interface Board 5 Inputs 8 Outputs Analog 2 In 2 OutThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.
MECTRONICELECTRONICS • HOME AUTOMATION • AUTOMATION • TECHNOLOGY■ Product detailsThis card, connected to the PC via the USB port, allows you to control analog and digital outputs as well as \"read\" both analog and digital inputs. For this purpose, special software is provided to be loaded onto the PC.Producer: Velleman® nvCode / Reference: K8055NMEAN: Attention, the product is ASSEMBLED and TESTED. Also available in KIT version or assembled version on | MECTRONICA STORE MANUAL, LIBRARIES AND SOFTWARE RESOURCES This board, connected to the PC via the USB port, allows you to control analogue and digital outputs as well as \"read\" both analogue and digital inputs. For this purpose, special software is provided to be loaded onto the PC. Another, perhaps more important, application is added to this first interesting application: in fact, all the software tools are provided to allow anyone to create a personalized program. To make this operation easier, there are some resources on the board to simulate various types of input signals as well as signaling LEDs on the various outputs. The interface has 5 digital inputs and 8 digital outputs, 2 analog inputs and 2 analog outputs, 2 PWM (Pulse Width Modulation) outputs with a resolution of 8 bits. The number of inputs/outputs can be further expanded by connecting up to a maximum of 4 cards to the PC\'s USB connector. Each card is equipped with its own identification number by means of two jumpers, SK5 and SK6. The board is supplied with a series of software complete with source code capable of managing all resources, i.e. all inputs and outputs. All communication routines are contained within the Dynamic Link Library (DLL) K8055D.DLL supplied together with the kit together with some examples of use in Visual Basic, Visual C++, Visual C#, Excel, Delphi and Borland C++ builder. Anyone, with these tools, will be able to create a customized control panel! Connections Technical characteristics and program 5 digital inputs (0=ground, 1=open) (test button available on the board). 2 analog inputs with attenuation and amplification options (internal +5V test available). 8 open collector digital outputs (maximum values: 50V/100mA, LED indication on the board). 2 analogue outputs (from 0 to 5V, output impedance 1.5K) or PWM (from 0% to 100% open collector outputs; maximum levels: 100mA/40V, LED indicators on the board). Up to 4 cards can be connected to the PC Conversion time: 2 ms per command Test and diagnostic software: - counting function on inputs 1 and 2 with the possibility of setting the debounce period. - separate test for inputs/outputs. - \"clear all\" function and \"set all\".- cursors indicating the level of the analogue output.- indication by means of a graphic bar of the analogue input. Minimum system requirements: - - 1 GHz CPU or higher - - USB 1.1 connection or higher - - Windows XP or higher operating system Uses Microsoft ® Human Interface Device (HID) driver, no external drivers required. Software, examples and DLLs can be downloaded here. Power supply through USB port: consumption approximately 70 mA Dimensions: 145 x 89 x 20 mm Software screen The software (developed in Delphi) supplied with this device allows complete management of all the board\'s resources. Through the control panel it is possible to manage four different cards as each interface has its own ID chosen from four different combinations. In fact, each card has two jumpers marked by the acronyms SK5 and SK6: by closing the jumpers or not it is possible to assign the desired address. The ON state obviously corresponds to the presence of the jumper while the OFF state indicates the absence of the jumper. These settings must be made before connecting the interface to the computer or before turning on the PC. Please remember that the cards connected to the PC can only be managed one at a time. In fact, even in the control panel, we must select the address of the card to control. There are two boxes called SK5 and SK6: the check mark corresponds to the \"ON\" status. To establish the connection with the selected card you need to click on Connect: if the addressing procedure has been carried out correctly and the selected card is present, the words \"Card x connected\" will appear. On the left of the control panel there are a series of controls that allow you to set the digital or analogue outputs to power level or ground. By clicking on Output Test, the 8 digital outputs will be activated one at a time cyclically. The Inputs section shows the status of the inputs: when an input is brought to ground (normally it is \"high\") the corresponding box on the graphic interface appears checked. Similarly, by selecting one of the 8 boxes relating to the digital outputs (Outputs), the corresponding output goes \"low\". There are also two sections on the board that allow you to count the number of pulses that reach the relevant inputs. Counters 1 and 2 are 16-bit converters built into the hardware; are triggered by I1 and I2. It is possible to test the counter with the SW1 and SW2 buttons: the counter adds 1 every time one of the two buttons is pressed. The debounce control allows you to determine the reaction time of the counter (0ms - 2ms - 10ms - 1000ms). The analogue outputs can be set by acting on the DA1 and DA2 commands while the display of the analogue input signals is entrusted to the AD1 and AD2 bars. Also in this case it is possible to carry out simulations using RV1 and RV2. K8055D.DLL: Procedure Overview NB: The examples in the DLL description are written in C++. Procedures and functions of the K8055D.DLL Software Pack iPhone Application download Android Application This is a demo version of the Android App for use with K8055, K8055N, VM110 and VM110NDownload the application from: K8055 Android application © 2011 John Marshall Client software can be downloaded from: Client software plug-in for IPEmotion software Students who are already working with the K8055 board will benefit from the measurement software plug-in IPEmotion...Download: Velleman K8055 Plugin
We prepare orders quickly and use selected national and international couriers, including Poste Italiane/SDA, BRT, DHL, UPS and DPD, based on the destination and planned service.
✓ Secure payments
Payments are handled directly via , using the methods available on the platform at the time of purchase.
If you need the invoice, correctly enter the billing information requested when ordering.
✓ Return and guarantee
You have 30 days to request the return, according to the conditions indicated in the advertisement and the procedures established by .
In the event of a defective product or problems with the order, use the tools made available by : we will provide you with all the necessary assistance.
✓ Technical assistance
Do you need product information or assistance with your order? Use the messaging. Our technical support is available both before and after your purchase.
Buy with peace of mind✓ Accurate descriptions • ✓ Tracked shipments • ✓ Technical assistance • ✓ Made simpleMECTRONICELECTRONICS • HOME AUTOMATION • AUTOMATION • SOFTWARE DEVELOPMENTPrestalia e-commerce solutions.Attention, the product is ASSEMBLED and TESTED. Also available in KIT version or assembled version on | MECTRONICA STORE MANUAL, LIBRARIES AND SOFTWARE RESOURCES This board, connected to the PC via the USB port, allows you to control analogue and digital outputs as well as \"read\" both analogue and digital inputs. For this purpose, special software is provided to be loaded onto the PC. Another, perhaps more important, application is added to this first interesting application: in fact, all the software tools are provided to allow anyone to create a personalized program. To make this operation easier, there are some resources on the board to simulate various types of input signals as well as signaling LEDs on the various outputs. The interface has 5 digital inputs and 8 digital outputs,
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.