|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Valspar Automotive Paint For 2005 - 2018 Land Rover Discovery
$99.00

Alex\'s Auto Parts Please Purchase piant with color code only. color names are not regulated and are not reliable indicators of actual color.If slow or fast activator for clear coat is preferable, please contact us via messaging or make a request at the time of payment in the \"payment note\" section. ITEMS INCLUDED IN THE kit: \"BASE COAT\" OPTIONS:1 PINT base coat(1 PINT READY TO SPRAY BASE COAT + STRAINER + TACK CLOTH) 1 Quart base coat(1 Quart READY TO SPRAY BASE COAT + STRAINER + TACK CLOTH)\"BASE COAT + clear\" OPTIONS:1 PINT + clear(1 PINT READY TO SPRAY BASE COAT + STRAINER + TACK CLOTH)(1 PINTURETHANE 4:1 clearCOAT WITH premeasured ACTIVATOR/HARDENER)(1/2oz ceramic polishing paste)(6oz spray gun cleaner) 1 QUART + clear(1 QUART READY TO SPRAY BASE COAT + STRAINER + TACK CLOTH)(1 QuartURETHANE 4:1CLEAR COAT CERAMIC POLISHING PASTE)(6OZ SPRAY GUN CLEANER)\"BASE COAT + CLEAR + primer\" OPTIONS: 1 PINT + CLEAR + primer(1 PINT READY TO SPRAY BASE COAT + STRAINER + TACK CLOTH)(1 PINTURETHANE 4:1 CLEARCOAT WITHpremeasuredACTIVATOR/HARDENER)(1 PINT URETHANE 4:1:1HIGH BUILDPRIMER/sealer WITH ACTIVATOR/HARDENER)(6oz Primer Reducer)(1/2OZ CERAMIC POLISHING PASTE)(6OZ SPRAY GUN CLEANER) 1 QUART + CLEAR + primer(1 QUART READY TO SPRAY BASE COAT + STRAINER + TACK CLOTH)(1 QUARTURETHANE 4:1CLEAR COAT WITHpremeasuredACTIVATOR/HARDENER)(1 Quart URETHANE 4:1:1HIGH BUILDPRIMER/sealer WITH ACTIVATOR/HARDENER)(12OZ PRIMER REDUCER)(1/2OZ CERAMIC POLISHING PASTE)(6OZ SPRAY GUN CLEANER)Recommendations: 1. Always test spray base coat before application. Metallic and pearl colors are sensitive to spaying pressure and coat thickness. Start test spaying with light coats, add more heavier coats for best match. Heavier coats will make the color darker (see listing\'s pictures). If color does not match, contact us via messaging system. 2. Primer, Base Coat and Clear Coat flow will change depending on the temperature. Lower temperatures will reduce drying speed, which may cause \"runs\". Before applying to the vehicle, test spray using spraying card (included in every order) to determine drying speed.Surface Preparation Instructions: If spraying new unprimed plastic, the surface must be lightly sanded with 600 sandpaper or automotive Scotch-Brite pad, cleaned with Wax & Grease remover or alcohol and sprayed with a single coat of adhesion promoter, before applying primer/color/clear coat. If spraying primed parts or over existing paint, primer is optional, adhesion promoter is not required. The surfaces will need light sanding and cleaning before spaying color and clear coat.Primer Instructions: Primer ships with reducer and activator. Primer must be reduced and activated before spraying. Mixing cups are included with the kit. Mixing ratio is 4 parts primer to 1 part activator to 1 part reducer for high-build primer.For sealer (thin primer) mix4 parts primer to 1 part activator to 2 parts reducer Spraying Pressure (18-22 PSI) Optimal temperature - 68 to 80 degrees Nozzle size - 1.4mm to 1.7mm Number of coats - 2 to 3 medium coatsTime between color coats - 20 min at 70 degreesSanding between coats in not needed If shape correction is required, primer can be sanded after drying, before applying color coat. Drying time before spraying color coat - 2 to 3 hours at 70 degreesColor Coat Instructions: Color coat ships ready to spray. It will need shaking only, before spraying. Spraying Pressure (18-22 PSI) Optimal temperature - 68 to 80 degrees Nozzle size - 1.2m to 1.3mm Number of coats - 2 to 3 light to medium, depending on color matchingTime between color coats - 15 min at 70 degreesSanding between coats in not needed Drying time before spraying clear coat - 45 min at 70 degreesClear Coat Instructions: Clear coat ships with premeasured activator. Activator is added to the can with clear coat before spraying. If splitting for multiple applications, mix 4 parts clear coat to 1 part activator. Spraying Pressure (18-22 PSI) Optimal temperature - 68 to 80 degrees Nozzle size - 1.3mm to 1.4mm Number of coats - 2 to 3 medium to heavy coats to build glossTime between coats - 15 min at 70 degreesSanding between coats in not needed Drying time before polishing - 48 hours at 70 degreesTerms and Conditions ShippingYour order will be shipped within 24 hours of purchase after the payment is cleared (EX. Weekends & Holidays).CommunicationPlease use message service for communication. Let us know if you need any additional information such as part number, additional pictures, shipping cost etc. All questions are usually answered within 3 hours. If you have any special requests such as address change let us know before you make a purchase. WarrantyAll purchases have 60 day 100% money back warranty. If you are not satisfied with your purchase, please contact us as soon as possible to resolve the problem.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|