VXDIAG VCX SE For JLR Diagnostic Scanner Key Coding ECU Programming Tool DOIP

VXDIAG USED VCX SE For JLR DOIP Diagnostic Scanner Key Coding Programming ToolVCX-SE is the latest generation of diagnostic equipment developed by Allscanner for remote diagnosis platform. The ultra-high integrated hardware design can fully adapt to a variety of original diagnostic software, not only support local diagnosis, but also realize super remote diagnosis. The TOP Reason to Choose VCX SE for JLR S~DD 1. VXDIAG VCX SE Support DOIP Function. 2. VCX SE Support Advanced PCM Coding 3. All System Diagnostic: Read & Clear DTC, Read Live Data Stream, Read Freeze Frame, Read PCM Info 4. Active Test/Bi-directional Control + Auto VIN Scan 5. Multi Service Functions 6. Support Full OBD2 Function 7. License 10 Years Free Update 8. VCX SE Support the Car Year from 2006-2021 9. VCX SE Support for Jaguar-Land RoverVXDIAG VCX SE -- A Professional Remote Diagnosis Devices
VCX-SE is the latest generation of diagnostic equipment developed by Allscanner for remote diagnosis platform. The ultra-high integrated hardware design can fully adapt to a variety of original diagnostic software, not only support local diagnosis, but also realize super remote diagnosis

Highlights of VXDIAG VCX SE For JLR
1. VCX DoIP supports 2006~2021 Jaguar & Land Rover;
2. Multilanguage: English, Spanish, French, Italian, Japanese, Dutch, Portuguese, Russian, Chinese etc.

VXDIAG VCX DoIP Diagnostic Function
Read and clear fault codes
Read data stream
Reset maintenance service
Test parts function
Match new keys
Change a car\'s configuration CCF
Coding a new module

The TOP Reason to Choose VCX SE for JLR S~DD
1. VXDIAG VCX SE Support DOIP Function.
2. VCX SE Support Advanced PCM Coding
3. All System Diagnostic: Read & Clear DTCs, Read Live Data Stream, Read Freeze Frame, Read PCM Info...
4. Active Test/Bi-directional Control + Auto VIN Scan
5. Multi Service Functions: EPB / ABS Bleeding / SAS / Throttle Relearn / Oil Reset / Headlight / Airbag Repair and etc...
6. Support Full OBD2 Function.
7. License 10 Years Free Update.
8. VCX SE Support the Car Year from 2006-2021 and will keep upgrade
9. VCX SE Support for Jaguar-Land RoverNotice：OUR DEVICE CAN SUPPORT THOSE CAR MODELS, BUT WE NOT PROVIDE SOFTWARE, BUYERS CAN GET THE SOFTWARE BY 2 WAYS:1) BUY FROM THE ORIGINAL FACTORY;2) DOWNLOAD FROM WEBLINK.We are not support to provide the original software, please buy it in the legal channels.

All System Diagnostic Function
By penetrating all available PCMs, including but not limited to PCM, , EPS, PDM, TPM, BCM, ABS, SCCM, etc., VCX SE retrieves information and performs OE-level diagnostics on all available vehicle systems, like read and clear codes, view data stream and freeze frame and read vehicle information, PCM Replacement. It not only enables you to troubleshoot promptly but also makes you customize the configuration.

PCM Coding & Reflash Hindden Functions
- PCM Coding
■ VXDIAG VCX SE automotive diagnostic tool has the capability to coding new PCMs or reflash old modules like , PCM, BCM and etc after replacement for the car models to solve issues like drivability, power loss, fuel efficiency and fault codes.

- Advanced PCM Coding
■ VCX SE advanced diagnostic tool comes with advanced PCM coding to make full use of the hidden features like auto park, tilting rear-view mirrors, unfolding mirrors, customizing daytime running light, disabling auto engine start-stop and etc depending on the electronic features already built-in.

- Reflash Hidden Functions
■ The configuration of vehicles are different from different cars, many low distribution models have hidden high distribution functions, which can bring convenience to car owners. VCX SE for JLR can coding the Hidden Functions of the Vehicle.

For Example:
Automatically unlocked after the flameout
Wiper reset after flameout
Open CIC menu version view function
Tilted state raining auto closes the skylight
Suddenly braked, the brake lights flash
Surround Sound/tire pressure test
More...

Note: This tool does not coding and code all modules on all models. We are not support to offer the online account, you need get it by yourself.

Active Test/Bi-Directional Control
The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, regramming or reinitialization, thus saving diagnostic time.

Auto VIN & Auto Scan
This function is suitable for newer models. Read the VIN code with one key.
It is convenient for you to check whether your car has been recalled, repaired, and other times.
After you get the VIN code, you can find the assembly drawing of auto parts on the website. More professional and convenient.

Key Matching
* Add transponder/smart key/remote learning
*Read pin code
* Matching new fob keys
* Add keys, all key lost, disable lost keys and generate keys
* Reset PCM & reset immobilizer

VCX SE Support Various Special Reset Features
For various scheduled service and maintenance include Maintenance Light Reset, throttle learning, steering angle learning, brake pad reset, tire pressure reset, ABS exhaust, battery matching, gear information learning, injector coding, regeneration, headlight matching, gearbox learning, suspension matching, Sunroof initialization, A/F adjustment, electronic pump start, release transportation mode, tire modification, door and window calibration, urea reset, NOX reset, start-stop setting, language setting, seat calibration, shielding failure, etc.

* Oil Lamp, Oil Reset
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.
* Electronic Parking Brake Reset
It is important in the maintenance of electronic braking system\'s safety and efficiency.
* Steering Angle Calibration
Helping clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
* ABS Bleeding
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).
* Tire Pressure Monitor System Reset
This function allows you to quickly look up the tire sensor IDs from the vehicle’s PCM, as well as to perform TPMS replacement and sensor test.
* Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
* Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off.
* Battery Maintenance System Reset
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
* () Regeneration
Specially works for system with regeneration, component replacement teach-in and teach-in after replacing the engine control unit.
* Electronic Throttle Position Reset
This function enables you to make initial settings to throttle actuators and returns the \'learned\' values stored on PCM to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.
* Gearbox Matching
1. This function can complete the gearbox self-learning to improve gear shifting quality.
2. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.
* AFS (Adaptive Front-lighting System) Reset
This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting
angle while monitoring the vehicle speed and body posture.
* Sunroof Initialization
This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.
* Suspension Calibration
1. This function can adjust the height of the body.
2. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.

And many more...

One device can replace many expensive OEM devices
◪ The hardware is updated synchronously with the VCI of the major original factories, and it fully supports the new models and new original software based on doip Ethernet diagnosis.
◪ Realize the original factory level diagnosis function of the world’s major brands, one equipment can replace many expensive OEM equipments.
◪ All kinds of advanced diagnosis and reset functions are completely consistent with the original factories, and the performance even exceeds the original factories.
◪ One click installation, original support driver and online upgrade, easy to use

Dual mode intelligent remote diagnosis
☑ Super remote diagnosis only needs equipment networking to realize on-line diagnosis of the original factory.
☑ Compatible with remote diagnosis, it can support remote diagnosis of various special function equipment.
☑ The equipment can quickly access to the remote diagnosis platform with one key.

Highly integrated vehicle diagnostic interface
▨ High performance dual core processor: a doip network processor and a vehicle bus processor.
▨ Support 4-way can bus, 2-way K-line / L-line, realize multi protocol high-speed concurrent communication.
▨ Innovative OBD-II multi-channel communication hardware supports intelligent switching between traditional bus and doip network.
▨ It supports mapping vehicle doip Ethernet to WLAN to realize wireless Ethernet diagnosis.
▨ Host communication interface supports USB / RJ45 / WLAN and other interfaces, which is flexible and easy to use.
▨ Portable design with integrated OBD-II interface, plug and play.
▨ The usb-type-c interface with reinforcement design can be plugged in and out stably.

VCX SE Features
Dual processor 580MHz + 180MHz
Support option1 connection
802.11n 150Mbps
USB Type-C Interface
USB Type-C to RJ45 Interface
OBD-II
Software switchable protocol for all pins of OBD
Remote support

Meet the automotive industry standard design
◈ SAE-J2534-1/2 Pass-Thru with EURO 5
◈ ISO-22900 MVCI & D-PDU
◈ ISO-13400 DoIP

J2534 original factory level PCM Coding functions
♚ PCM software upgrade and calibration.
♚ PCM replacement, flashing and Coding

VCX SE Hardware Specifications
【Network Processor】
32bit 560MHz MIPS
32MB FLASH
128MB DDR
【Protocol Processor】
32bit 180MHz ARM
1MB FLASH

Diagnostic Interface: SAE-J1962 standard, OBD-II diagnostic interface
DoIP Interface (to Vehicle): ISO-13400-4 Option1 Ethernet
Wired Interface (to PC): USB Type-C
Network Interface (to PC): USB Type-C to RJ-45 Ethernet
Wireless interface (PC): WLAN 802.11 b/g/n Wireless Network
FN Function Button: Long press for 3 seconds to enter the distribution network mode
Power Supply: DC 9V-36V (Compatible with 12V/24V) Vehicle Power Supply
Power: 2W
Power Adapter: DC 12V 2A
Size: 140×50×25 (mm)
Net Weight: 0.3kg
Shell Material: Reinforced Plastic Shell
Working Temperature: -20℃~70℃
Storage Temperature:-40℃~85℃
Standard CE: EU CE & US FCC

Four Indicators Status -- Power, Wireless, Communication and Vehicle
Red LED: Light after startup, Flicker in error.
Blue LED: Rapid flickering in wireless communications, Slow flashing in wireless distribution network.
Host Communication Status: Red flashing during USB communication, Blue flash when LAN communication.
Vehicle Communication Status: Red flashing in traditional protocol, Blue flashing when Doip protocol.