Universal Tilt-Adjustable Mount for Raspberry Pi Cameras

Universal Tilt-Adjustable Mount for Raspberry Pi CamerasThis larger version of the Tilt-Adjustable Raspberry Pi Camera mount allows for mounting the Raspberry Pi High Quality (HQ) Camera as well as the camera modules. Also compatible with the Global Shutter Camera with the separate mounting hardware kit.The Universal Tilt-Adjustable Camera Mount for the Raspberry Pi attaches directly to the Raspberry Pi case for an easy and clean solution to point your PiCam wherever you want. Compatible with the hole pattern of the Raspberry Pi HQ Camera as well as the Camera Module v1, v2 and v3, and also the \'ArduCam* 16MP Autofocus\' and the Raspberry Pi AI Camera. Does not obstruct any of the port slots in the RPi case. Made out of clear acrylic. This mount is also compatible with the Global Shutter Camera, but needs longer screws and standoffs. Add the Poolside Factory Global Shutter Mounting Hardware Add-On Kit in addition to this mount if you plan to use it with the Global Shutter Camera.Dimensions:Mounting surface: 1.5\" / 38mm x 2\" / 50mmHeight: 2.5\" / 64mmWidth without camera module attached and tilted horizontally: 1.6\" / 40mmWhat\'s includedSee picture of disassembled mount. Includes the two acrylic parts, all bolts, nuts, spacers, screws, double stick tape and assembly instructions. Does NOT include camera module, Raspberry Pi circuit board nor RaspberryPi enclosure. Tools required for assembly (not included):- Small Phillips screwdriver (PH0)- Pliers to hold the nut while tighteningDesigned and Manufactured in Northern California.Use the Universal Tilt-Adjustable Raspberry Pi Camera Mount to create an Apple Homekit camera, see HowTo.* For the ArduCam 16MP, you have to take it out of the red/white Arducam enclosure and mount the PCB directly (it has the same hole pattern as the Raspberry Pi Camera Modules). Universal Tilt-Adjustable Mount for Raspberry Pi Cameras This larger version of the Tilt-Adjustable Raspberry Pi Camera mount allows for mounting the Raspberry Pi High Quality (HQ) Camera as well as the camera modules. Also compatible with the Global Shutter Camera with the separate mounting hardware kit.The Universal Tilt-Adjustable Camera Mount for the Raspberry Pi attaches directly to the Raspberry Pi case for an easy and clean solution to point your PiCam wherever you want. Compatible with the hole pattern of the Raspberry Pi HQ Camera as well as the Camera Module v1, v2 and v3, and also the \'ArduCam* 16MP Autofocus\' and the Raspberry Pi AI Camera. Does not obstruct any of the port slots in the RPi case. Made out of clear acrylic. This mount is also compatible with the Global Shutter Camera, but needs longer screws and standoffs. Add the Poolside Factory Global Shutter Mounting Hardware Add-On Kit in addition to this mount if you plan to use it with the Global Shutter Camera.Dimensions:
Mounting surface: 1.5\" / 38mm x 2\" / 50mm
Height: 2.5\" / 64mm
Width without camera module attached and tilted horizontally: 1.6\" / 40mmWhat\'s includedSee picture of disassembled mount. Includes the two acrylic parts, all bolts, nuts, spacers, screws, double stick tape and assembly instructions. Does NOT include camera module, Raspberry Pi circuit board nor RaspberryPi enclosure. Tools required for assembly (not included):- Small Phillips screwdriver (PH0)
- Pliers to hold the nut while tighteningDesigned and Manufactured in Northern California.Use the Universal Tilt-Adjustable Raspberry Pi Camera Mount to create an Apple Homekit camera, see HowTo.* For the ArduCam 16MP, you have to take it out of the red/white Arducam enclosure and mount the PCB directly (it has the same hole pattern as the Raspberry Pi Camera Modules). × × × × × × × × ×
You might also like Tilt-Adjustable Mount for Raspberry Pi Camera Module Raspberry Pi to iPod HiFi 30-pin-dock Adapter for Airplay Audio Streaming Global Shutter Camera Mounting Hardware (Add-on for Universal Mount) Cup Holder for Sundance 880 Cameo & Optima Spa/Hot Tub