|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Universal Rear Bumper Lip Diffuser Lower Splitter Shark Fin 6 Wing Carbon Fiber
$22.98

- Minimizes air turbulence under the rear bumper, optimizing airflow for better stability at highway speeds
- Adds a subtle, sporty look to your vehicle without overly aggressive styling
- Suitable for daily commuters, sport compacts, and modified cars alike
🔹 Durable ABS Construction - Lightweight yet rigid ABS material resists scratches, water damage, and UV fading (no cracking or discoloration from sun/rain exposure)
- Black finish blends seamlessly with most factory or custom paint jobs
- Built to withstand daily driving wear and minor road debris impacts
🔹 Flexible Installation & Long-Term Support - Dual mounting options: Use adhesive tape for quick, drill-free attachment (ideal for renters or temporary use) or screws for a permanent, secure hold
- Professional drilling is recommended for screw installation to avoid damaging bumper wiring or structural components
- Backed by a 1-year warranty against material defects and lifetime support for fitment/installation questions (resolved within 24 hours on weekdays)
3. Step-by-Step Installation Guidelines - Prep the Surface: Thoroughly clean the rear bumper mounting area with alcohol or degreaser to remove dirt, wax, or oil – this ensures maximum adhesive tape adhesion.
- Test Fit First: Place the diffuser on the bumper to align it evenly; mark the position with a pencil. If using screws, mark drill holes (avoid hidden wiring or reinforcement bars).
- Install:
- Adhesive-only method: Peel the tape backing, press the diffuser firmly onto the marked area, and hold for 1–2 minutes. Allow 24 hours for the adhesive to fully cure before washing the car.
- Screw method: Drill pilot holes at the marked points, then secure the diffuser with the included screws (tighten gently to avoid cracking the ABS or bumper).
- Final Check: Confirm the diffuser is securely attached and aligned before driving.
4. Important Notes - Fitment Check: Always measure your vehicle’s rear bumper width before purchasing – the diffuser’s 67×15.5cm size may not fit extra-wide or uniquely shaped bumpers.
- Warranty Coverage: The 365-day warranty covers manufacturing defects (e.g., cracked ABS, defective adhesive) but not damage from improper installation or accidents.
- Issue Resolution: Contact the seller first (before leaving response) for fitment problems, missing parts, or defects. Provide photos of your bumper and the diffuser for prompt solutions (replacement, installation guidance, or refund).
- Maintenance Tip: Clean the diffuser with mild soap and water – avoid harsh chemicals (e.g., acetone, abrasive cleaners) that can damage the ABS finish.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|