Versatile Compatibility: Universal four-link suspension kit that works with both unibody and full frame vehicles, mountable inside or outside of frame rails to accommodate various car designs., Improved Performance: The parallel four-link suspension design eliminates pinion angle changes on hard acceleration, increasing efficiency and control during high-speed runs., High-Quality Construction: The 3/4\" rod ends and 1\" OD threaded steel tubes ensure rigidity, while the 7-gauge brackets mounted in double shear add to the strength and longevity of the setup., Complete Control: Must be used with a lateral axle control device such as a Panhard bar or Watts link for complete rear suspension control, ensuring total axle command and improved vehicle handling., Adjustable Setup: Comes with adjustab Universal Drag Race H.D. Parallel 4-Link Rear Suspension Kit Sku # 91649068 Mfr. Part # 91649068 Condition New Brand Speedway Motors Sold Each Details
- Parallel 4-link suspension system works with full frame or unibody vehicles
- Locates axle and prevents rotation/pinion angle change
- Requires a Panhard bar or Watts link system for total axle control
- Weld on 7 gauge brackets place tubular links in double shear mounting for strength
- Large 3/4-inch rod ends, and 1-inch steel link tubes easily handle high horsepower
- Multiple link points to square the rear axle, change instant center, and more
- Includes weld on upper shock mounts and adjustable bolt on lower mounts
- Works with coil spring or air spring mount kits or coilover shocks
- Can be installed inboard or outboard of frame rail as needed for clearance
Give Your Racecar a True Adjustable 4-Link Rear Suspension for Better Control
A “fixed” suspension with no adjustment is fine for street use and low horsepower applications. In most cases what the factory engineer designed for suspension pivot points, spring rates, pinion angle, and more are all a series of compromises in packaging and cost by the manufacturer. Trying to put 500 or more horsepower down on a dragstrip surface with drag radials or slicks is asking for major wheel hop or broken parts as leaf springs wrap up, triangulated four-links bind, and more. All these factory compromises do nothing for maintaining pinion angle and eliminating axle movement. Bolt on traction aids like Shop Bolt-On Traction Bars help limit pinion angle changes but do nothing to change roll center or anti-squat. The only way to adjust these settings is with an adjustable rear suspension and one of the most popular options is a parallel four-link suspension setup.
The parallel four-link suspension is just as it sounds, four links (two upper and two lower) that are parallel to each other connecting the axle housing to the vehicle’s frame or unibody. The parallel 4-link suspension locates the rear axle assembly, centering it in the rear wheel opening, and prevents pinion axle changes during hard acceleration. Furthermore, the four-link suspension design allows squaring the axle in the chassis so that there is no deviation on the rear thrust angle, provides the user with the ability to adjust the instant center in relation to the car’s center of gravity (hint, a lot of math is involved). Making these changes also provides for changes in anti-squat, which further aids in tuning the 4-link rear suspension and chassis to the horsepower level, traction ability of the track surface and your rear tires, and more for the best launch possible.
Our Parallel Four-Link Suspension Works in Most Any Chassis Style
No matter if you’re looking to race a full frame pickup or a unibody muscle car like a Camaro or Mustang, our universal 4-link kit can be fitted to your ride. The frame brackets are made from 7 gauge steel for strength and are designed to be welded to any structural part of the frame or unibody (some vehicles may require additional reinforcement or a crossmember added for the correct placement of the frame brackets). The axle brackets feature a 3-inch radius to fit common 3-inch axle tubes, such as those found on the venerable Shop Ford 9-Inch Axle Housings. Both provide double shear mounting of the adjustable suspension links for strength. Adjustable rear shock mounts allow you to position the lower shock mount for the correct shock distance per your shock manufacturer. The 1-inch steel link bars use heavy duty 3/4-inch rod ends with left and right threads, allowing easy on vehicle adjustments for pinion angle and axle centering. We provide plenty of link mounting hole options to plot and set your suspension’s instant center and anti-squat for your horsepower level, track conditions, and more.
The parallel 4-link rear suspension ultimately controls axle location fore/aft and pinion angle, but you will need either a Universal Weld-On Panhard Bar Kit or Universal Weld-On Watts Link Kit to control lateral axle movement. While some four-link suspension setups use an angled track bar, these can flex under hard acceleration, we much prefer the Panhard bar or Watts link options, even though they can limit the use of full exhaust tailpipe routing to the rear of the car if you’re looking to retain a full exhaust system.
The adjustable shock mounts are designed for Shop Drag Race Coilover Rear Shocks use, but if you prefer to run a traditional spring, or even an adjustable ride height Four-Link Air Spring Kit, you can run a fixed or adjustable Shop Rear Drag Shocks on these mounts as well.
Absolute Traction on The Track or Street Is Just an Adjustment Away
No other factory suspension provides the ability to adjust your vehicle’s traction capabilities like an adjustable parallel four-link suspension setup. Very few aftermarket rear suspensions offer this adjustment ability as many are focused on performance street use or road course ability. So, if you’re goal is to make it from point A to point B on a 1/4-mile (or 1/8-mile) dragstrip with the maximum traction available, you’ll want an adjustable parallel 4-link suspension like this. As track conditions change, tire temperatures change, or you add or take away horsepower in your tune, or weight in your chassis, having the ability to quickly make rear suspension link adjustments (along with shock tuning) will ensure your ride goes down the track straight as a string without any drama so you can focus on the win.
Kit Includes:
- Frame and lower shock brackets
- 3/4” rod ends / 5/8\" hole
- Jam nuts
- 14” threaded 1” O.D. tubes
- Bolts and washers
Specs Sold in Quantity Kit MFG. Part # 91649068 Notes Requires welding and fabrication of frame mount brackets or crossmember Rear Suspension Type Solid Axle Trailing Arm Style Parallel 4-Link Suspension Kit Type Conversion Suspension Height Adjustment Stock Height Rear Coil Springs Included No Spring Type Not Included Shocks Included No Lower Shock Mount 1/2 Inch Eyelet Upper Shock Mount 1/2 Inch Eyelet Adjustability 5-position Bolt-On No Axle Housing Included No Finish Natural Bushing Material Spherical bearing Lower Trailing Arms Included Yes Upper Trailing Arms Included Yes Hardware Included Yes Frame Brackets Included Yes Welding Required Yes Panhard Bar Included No Torque Arm Included No Control Arm Material Steel Control Arm Finish Natural Third Member Included No Watts Link Included No Adjustable Panhard Bar Included No Axle Tube Diameter 3.00" Diagonal Link Included No Rear Shocks/Struts Included No Rod Ends Included Yes Shock Mounts Yes Wheelie Bar Mounts No Material Type Steel Adjustable Yes Reviews This is the second 4 link kit that I have purchased. Rated by Glenn on December 06, 2024
Summary: Building (2) drag S10s was so impressed with my kit that I sold my customer on buying one for his build. All goes well planning on selling more of these. Thanks for a great product at a reasonable price!!!!!
Yes, I recommend this product.
Nice kit Rated by Scooterreck1 on July 26, 2024
Summary: Good 4 link kit just wish description was clearer. Link bars are only 14" was able to order longer bars
Yes, I recommend this product.
Will buy any time i need med horsepower kit. Rated by Moonshine on May 25, 2024
Summary: Great kit. Its nice to have every piece you need without having to chace small parts down. Love the layout.
Yes, I recommend this product.
Nice kit Rated by Fudd on April 20, 2024
Summary: Used it for my t bucket project. Worked nice and all parts were there
Yes, I recommend this product.
Yes, would buy again Rated by Roger Cherry on May 04, 2023
Summary: Incorrect heim was replaced by Speedway
Yes, I recommend this product.
Related Items / Suggested Parts Speedway Coilover Shock Mount Bolt w/ Plain Support Collar, 4-1/2 Inch Speedway Coilover Shock Mount Bolt w/ Plain Support Collar, 6 Inch Plain Steel Bolt-On Rear Panhard Bar, For Ford 8 & 9 Inch Axle Speedway Universal Weld-On Rear Panhard Bar Track Rod Kit Permatex® Anti-Seize Lubricant, 1 Fl. Oz Hoosier 18192D06 Drag Racing Slick Tires, 29.5/1025-15 D06 Universal Steel Rear Shock Mount Bracket for 3 Inch Axle Tube Super Bell 1090 Upper Rear Shock Mounts Coilover Shock Mount 5/8 Inch Bolt w/ Support Collar, 4-1/2 Inch Speedway Coilover Shock Mount Bolt with Support Collar, 6 Inch Short Rear Axle Brackets Speedway Lower Rear Axle Radius Rod Mount Bracket, 5-3/4 Inch Tech Support We\'re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 74 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.