Universal All Glock Rear Sight Mount Plate Base Fit For RMR Red Dot Scope Mount
$12.00

Description about Universal Mount:
1.Universal optics mount for most proliferated sites in the field2.Super low-profile3.Ability to use an optic without cutting your slide.4.Sleek solid steel construction5.The mount itself is secured to the slide via the dovetail with 6 set screws.Product Spec:Fits all Models Except 42/43Length:1 7/8”Width: 1 1/8”Height: 1/8”Weight: 1.3 oz (with mounting hardware)Materials: aluminumColor: black
Notice: the pins for the RMR red dot only fit for the original RMR. But it can also install well on the replica RMR only with the screws
The glock mount is not fit all Glock gun.If your gun has trapezoidal slot,this glock mount do not fit for your gun.You need This one Universal Mount .
Product installation:1.Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Triji-con RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.2.It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.