The listing is for the buyer to ship their working Nintendo AV Famicom home console and NESRGB kit to receive the following refurbishments/services:
1) The motherboard has been cleaned with 91% isopropyl alcohol.
2) Serviced with Tim Worthington’s NESRGB kit (this is not included) to output RGB, S-Video and Composite Video. In addition, it will be wired for Csync (either TTL or 75 ohm terminated - you tell me which one you need).
3) All electrolytic capacitors on the motherboard will be replaced with brand new Nichicon and Panasonic branded capacitors.
4) If you have the NESRGB version 4+, it can be wired for wireless palette changer via controller that includes six different palettes: Digital Prime, Nestopia YUV, Sony CXA, Smooth V2, FCEUX, & Wavebeam via controller combination (see below). If you are using an earlier version, the three toggle switch can be installed.
5) If you have the NESRGB version 4, it can be wired for wireless IGR (in-game-reset) via controller combination (see below).
6) Full audio restoration via Ace’s specs to the motherboard and NESRGB board using Firebrandx’s wiring methods.
7) The original 7805 voltage regulator will be replaced with a brand new 7805 voltage regulator for optimal performance.
8) An LED mod can be performed (look at photos) with the choice of slow-rotating RGB, purple, red, blue or green LED.
Button Combinations:
Start+Select+Left - Decrement palette counter.
Start+Select+Right - Increment palette counter.
Start+Select+Left (hold for 2 seconds) - Disable/enable NESRGB board.
Start+Select+Right (hold for 2 seconds) - Set to palette 1.
Start+Select+A+B - In game reset.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.