|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
USB Type C Lithium Battery Charger Module Charging & Protection Board 3.7V 4.2V
$5.00

✨ USB Type-C Lithium Battery Charger & Protection Board Module (3.7V / 4.2V) ✨ Take your DIY electronics, custom battery packs, and portable tech projects to the next level with this ultra-compact USB Type-C lithium battery charging and protection module! 🔋 Embedded with the trusted TP4056 controller chip and an integrated battery management protection IC, this handy board allows you to safely charge single-cell 3.7V / 4.2V Lithium-Ion (18650, Lipo, pouch cells) batteries directly through any modern Type-C cable or power source! 🔌⚡ Safe, reliable, and essential for every maker\'s workbench! 🛠️✨ 🌟 Dual Protection & High-Efficiency ChargingDirectly connecting lithium batteries to power sources without proper regulation can cause overcharging, short circuits, or battery damage. 🚫 This module acts as a smart safeguard! It regulates constant current and constant voltage (CC/CV) charging while continuously monitoring battery health. Built-in protection circuits cut power instantly in case of over-discharge or short circuits, extending your battery\'s lifespan and ensuring safe operation! 🛡️ Power up with total confidence! 💥 - 🔌 Modern USB Type-C Input: Effortlessly plugs into standard smartphone chargers, power banks, laptop ports, or USB power adapters.
- 🛡️ Built-in Battery Protection IC: Features over-charge protection (stops charging at 4.2V) and over-discharge protection (cuts load power when battery voltage drops below ~2.5V).
- ⚡ 1A Fast & Stable Charging: Preset to deliver up to 1000mA (1A) charging current, perfect for standard 18650 cells and Lipo batteries.
- 🚦 Dual LED Status Indicators: Bright onboard LEDs display real-time charge status (Red = Charging, Blue/Green = Fully Charged).
🚀 Key Technical Specifications - ⚡ Input Voltage Range: 4.5V – 5.5V DC (via Type-C port or direct solder pads).
- 🔋 Full Charge Cut-off Voltage: 4.2V ± 1%.
- 🛡️ Over-Current Protection Threshold: 3A.
- 📐 Compact Form Factor: Micro-sized footprint that fits easily inside custom 3D-printed enclosures, flashlights, and portable gadgets.
- 🛠️ Solder Pad Connections:
- IN+ / IN-: Alternative DC input pads if not using the Type-C port.
- B+ / B-: Connects directly to the Positive and Negative battery terminals.
- OUT+ / OUT-: Connects to your device load (delivers protected battery power output).
💡 Multi-Purpose DIY & Maker Applications - 🔦 Rechargeable Flashlights & Headlamps: Convert older battery-operated flashlights into modern Type-C rechargeable lights.
- 🕹️ Custom Bluetooth Speakers & Toys: Power small DIY audio amps, handheld game consoles, and RC toys with rechargeable 3.7V Lipo packs.
- 🤖 Arduino, ESP32 & Raspberry Pi Pico Projects: Provide regulated battery backup power for wireless IoT sensors, smart home nodes, and robotics.
- 🎒 Portable Power Kits & Solar Storage: Store solar energy in 18650 cells for off-grid lighting or outdoor field gear.
🛠️ Simple Wiring & Safety Instructions - 🔋 Connect Battery First: Solder the positive battery terminal to B+ and the negative terminal to B-.
- 💡 Connect the Load: Solder your device or micro-controller power inputs to OUT+ and OUT- (this routes power through the protection circuit).
- 🔌 Plug in Type-C Cable: Connect a USB Type-C cable to start charging—watch the Red LED light up until the Blue/Green LED signals a full charge!
💖 Bring modern Type-C convenience and ultimate battery safety to all your custom electronics projects! 🔋⚡✨

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|