UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC...

UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot
Product Details Size: On/Off Delay without Case
Brand: UCTRONICS
MPN: U6031
UPC: Does not apply
EAN: Does not apply

• Connector Type: Through Hole/Surface Mount
• Contact Material: Silver
• Contact Type: Normally Open
• Current Rating: 10 A
• Mounting Type: Surface Mount
• Connector Type: Through Hole/Surface Mount
• Contact Type: Normally Open
• Current Rating: 10 A
• Mounting Type: Surface Mount
• Operation Mode: On Delay
• Coil Voltage: 12 volts
• Contact Current Rating: 10 A
• Maximum Switching Current: 10 A
• Maximum Switching Voltage: 12 volts
• Minimum Switching Voltage: 12 volts_of_direct_current
• Contact Material: Silver
• Brand Name: UCTRONICS
• Number of Items: 1
• Item Weight: 19.87 g
• Manufacturer: UCTRONICS
• Model: U6031
• Part Number: U6031

• IMPORTANT NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly.
• Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A
• Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.
• Self Protection: Built with protection against reversal diode, supports anti-reverse protection.
• Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system.