Turbo Racing C64 1:76 RC Drift Car, Full Proportional RTR (Blue)

User Description:
1. The newly purchased car may have low battery, you can use USB to charge it for half an hour before playing.
2. The packaging comes with a small square cushion that can be used for practicing spin drifting first.
3. If there is a problem with pairing, the package comes with a PIN needle. When opening the remote control and the vehicle at the same time, use the PIN needle to press against the PIN point on the vehicle chassis for pairing.
4. The remote control needs to be manually assembled, and if the assembly direction is incorrect, it may not turn on. Please assemble in the correct direction, refer to the packaging pictures and accompanying instructions. Model Name:C64 Drift RC car BLUE
Scale: 1:76
Frequency Bran:2.4GHz
Control Distance:30M
Working Time: 30 minutes
Slope angle: 30 degree
Drive mode: two-wheel drive
Proportional steering: proportinal steering
Charging battery: 3.7V 55mAh LiPo
Trim function: Yes
REV: Steering reverse
Color: Blue
What remote conrol can fit this car:Turbo Racing VT system transmitter
1:76 RC car size:60*25.6*17.3mm Pakcing List:
1* 1:76 C64 Drift RC car
1* P21SVC 4CH remote
2* Car shell without color
1* Stainless Steel screwdriver
1* Type C charging cable
1* Packing box
1* User manual Troubleshooting steps:
1. Not in a straight line: Adjust the SVC knob of the remote control to 0 Turning off the gyroscope will cause it to travel in a straight line. Recheck if the remote control ST-TRIM (steering adjustment) is at the center point, and use ST-TRIM (steering adjustment) to adjust the car to move in a straight line.
2. Automatic forward/backward movement of the car: Align the TH-TRIM arrow on the remote control with the center point in the power on state, then turn off the remote control and restart it (reminder: When starting up, do not touch the throttle trigger (trigger) with your hands, which will cause the car to move automatically)
3. When the car runs, it becomes unstable and shakes: If the car is unstable, it may deviate due to terrain and speed issues. If the speed is (100%) fast, the car\'s grip may be insufficient, resulting in deviation
4. Re code: When the remote control and the vehicle are powered on normally, use the matching code to match the BIND pin hole on the vehicle. The front lights of the vehicle change from flashing to permanently on, indicating that the remote control has successfully paired with the vehicle
5. No response to vehicle forward/backward: When the vehicle does not have throttle function, pull the throttle trigger to the full forward direction and adjust TH-D/R to position 10.
High simulation headlights, LED light on chassis The high simulation headlights have a spotlight effect and the double flash function. The chassis lamp can be controlled by Channel 3.
TAILLIGHTSTOPLIGHTS Cool taillight.During braking, the stoplights are on. THR-Curve upgrade After start-up, the first half (50%) of the accelerator speedsup slowly in a linear way, which is relatively gentle and soft;the second half (50%) of the accelerator speeds up faster,with strong power output; bring more exciting experience and hand feeling of operation and control.
Type-C charging port,Battery capacity 55mAh Battery working time is up to 30 minutes, built-in Type-c charging port, suitable for various charging modes; charging time is 40 minutes.
TAIL LIGHT STOP LIGHTS Cool taillight.During braking, the stoplights are on.
DIY removable car shell The car body shell can be disassembled. 2 car body shells with the original color are given for free. Make your small car by yourself!It\'s a great Christmas present!