TREND NETWORKS PoE PRO
Model: R158004
New Open Box Demo Unit
Like new condition
Tested, working
Includes all accessories shown in the pic including carrying case and original boxBONUS: Comes with 12 RJ45 Identifiers (numbered 13-24) for wiremapping network TREND Networks R158004 PoE Pro Data Cable and Power Over Ethernet (PoE) Verifier identifies the Class of the PoE source and power available to a PoE device, regardless of cable length, cable quality, or other factors. Previously technicians had to understand all of the various standards, device power outputs and cable lengths to be sure a device would operate successfully - PoE Pro (R158004) provides a clear pass/fail result to IEEE 802.3af/at/bt standards.
PoE Verification and Troubleshooting
Do you have enough power at the device location?
The PoE Pro (R158004) displays the maximum power available at the device location including the maximum watts, Class (0-8), Voltage, Type (af/at/bt) and 2/4 pair operation.
Some switches or injectors may provide power that exceeds their IEEE Class rating. The PoE Pro (R158004) can test this ability with its extended power test. Simply press the network button for 3 seconds and the PoE Pro (R158004) will increase power demand up to a maximum of 90 watts.
What type of Power Sourcing Equipment is in use?
Reduce troubleshooting time by identifying the type of PoE equipment in use. End-point PoE switches are in the equipment room vs. mid-span injectors can be anywhere along the cable. This is achieved by displaying which twisted pairs have power. Power on pairs 1/2, 3/6 indicates a PoE switch, while power on pairs 4/5, 7/8 indicates a mid-span injector.
Does the PoE switch provide enough power?
Test and verify PoE switches and injectors by connecting directly to them and displaying the maximum power, Type (af/at/bt), Class (0-8), and Voltage.
Cable Verification and Troubleshooting
Wiremap with Length
Accurate fault finding that saves time and money - The PoE Pro (R158004) utilises Time Domain Reflectometry (TDR) to accurately measure cable length and provide distance to fault information. This speeds up fault finding as well as minimizes disruption and potential damage to fixtures and fixings.
Instant results - With comprehensive details on faults such as opens, shorts, crossovers, and split pairs, PoE Pro (R158004) identifies wiring errors instantly.
No need for separate testers - The integrated RJ11/RJ12 (voice), RJ45 (data) and F-Type (video) connectors allow faster testing of most types of low-voltage cables by eliminating the need for separate testers.
Coax Testing
Validate voice and data services faster - PoE Pro (R158004) quickly determines which media service is running over the cable, such as Ethernet, ISDN, PBX and PoE resulting in faster fault diagnosis.
Quickly determine network speed - Troubleshooting active Ethernet networks is also made easier with in-built network detection that displays the speed (10/100/1000) and duplex (Half/Full) status of a network port.
Service Detection
Voltage protection for your tester - The PoE Pro (R158004) will detect high voltages and provide a visible and audible warning to prevent damage to the tester.
Cable tracing to save time - The analogue / digital tone generator with multiple tones can be used with most analogue and digital cable tracing probes, which is essential for finding faulty or mis-labelled cabling.
Port identification - The port blink function will identify the switch port to which a cable is connected.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.