Transducer Techniques SSI Smart Sensor Indicator (Plug & Play TEDS IEEE 1451.4)
Model: SSI | Condition: New - Open box (see photos). The item pictured is the exact item you will receive. Quantity 1 available.
Hand-held Smart Sensor Indicator and datalogger for load cells, torque sensors and pressure transducers. Plug in a TEDS IEEE 1451.4 compliant sensor and the SSI automatically reads and scales it. Non-TEDS sensors can be set up from the front-panel buttons.
Key Specs
- TEDS IEEE 1451.4 plug and play smart sensor indicator
- Sampling rate: 15,360 samples/second (true peak / valley capture)
- 6-digit seven-segment LCD display
- Two alarms with LED indicators and relay outputs
- Built-in data logging, USB interface to PC
- Rechargeable battery, up to 65 hours per charge with a 350 ohm bridge
- Keypad: Menu, Peak, Power, Recall, Units, Log, Tare/Reset, Alarms
- Made in the USA (Transducer Techniques, Temecula, CA)
Calibration
The included calibration data sheet shows a calibration date of 3/6/2024 and a recalibration date of 3/6/2025. The recalibration date has passed, so recalibration is recommended if you need current certification.
Compatibility
Works with TEDS IEEE 1451.4 compliant load cells, torque sensors and pressure transducers, and with non-TEDS bridge sensors via manual setup. Please verify compatibility with your system before purchase.
What\'s Included
- 1 x Transducer Techniques SSI Smart Sensor Indicator
- 1 x USB A-to-B cable
- 1 x USB power adapter / charger
- 1 x Operator manual with calibration data sheet
Only what is pictured is included.
Shipping
Ships from Massachusetts, USA, carefully packed.
Questions?
Send a message - I usually reply within 24 hours. Reasonable offers welcome.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.