Tilt-Adjustable Mount for Raspberry Pi Camera Module

Tilt-Adjustable Mount for Raspberry Pi Camera ModuleThe Tilt-Adjustable Camera Module Mount for the Raspberry Pi attaches directly to the Raspberry Pi case for an easy and clean solution to point your PiCam wherever you want. Compatible with the hole pattern of the Raspberry Pi Camera Module v1, v2 and v3 as well as the \'ArduCam* 16MP Autofocus\' and the Raspberry Pi AI Camera. Does not obstruct any of the port slots in the RPi case. Made out of clear acrylic.Dimensions:Mounting surface: 1\" / 25.4mm x 2.35\" / 60mmHeight: 1.75\" / 45mmWidth with camera module mounted and tilted horizontally: 1.6\" / 40mmWhat\'s includedSee picture of disassembled mount. Includes the two acrylic parts, all bolts, nuts, spacers, screws, double stick tape and assembly instructions. Does NOT include camera module, Raspberry Pi circuit board nor RaspberryPi enclosure.Tools required for assembly (not included):- Small Phillips screwdriver (PH0)- Pliers to hold the nut while tighteningDesigned and Manufactured in Northern California.Use the Tilt-Adjustable Raspberry Pi Camera Module Mount to create an Apple Homekit camera, see HowTo on the Poolsidefactory website.* For the ArduCam 16MP, you have to take it out of the red/white Arducam enclosure and mount the PCB directly (it has the same hole pattern as the Raspberry Pi Camera Modules). Tilt-Adjustable Mount for Raspberry Pi Camera Module The Tilt-Adjustable Camera Module Mount for the Raspberry Pi attaches directly to the Raspberry Pi case for an easy and clean solution to point your PiCam wherever you want. Compatible with the hole pattern of the Raspberry Pi Camera Module v1, v2 and v3 as well as the \'ArduCam* 16MP Autofocus\' and the Raspberry Pi AI Camera. Does not obstruct any of the port slots in the RPi case. Made out of clear acrylic.Dimensions:
Mounting surface: 1\" / 25.4mm x 2.35\" / 60mm
Height: 1.75\" / 45mm
Width with camera module mounted and tilted horizontally: 1.6\" / 40mmWhat\'s includedSee picture of disassembled mount. Includes the two acrylic parts, all bolts, nuts, spacers, screws, double stick tape and assembly instructions. Does NOT include camera module, Raspberry Pi circuit board nor RaspberryPi enclosure.Tools required for assembly (not included):- Small Phillips screwdriver (PH0)
- Pliers to hold the nut while tighteningDesigned and Manufactured in Northern California.Use the Tilt-Adjustable Raspberry Pi Camera Module Mount to create an Apple Homekit camera, see HowTo on the Poolsidefactory website.
* For the ArduCam 16MP, you have to take it out of the red/white Arducam enclosure and mount the PCB directly (it has the same hole pattern as the Raspberry Pi Camera Modules). × × × × × × ×
You might also like Universal Tilt-Adjustable Mount for Raspberry Pi Cameras Raspberry Pi to iPod HiFi 30-pin-dock Adapter for Airplay Audio Streaming Global Shutter Camera Mounting Hardware (Add-on for Universal Mount) Cup Holder for Sundance 880 Cameo & Optima Spa/Hot Tub