Thinline Telecaster router templates. This set includes everything you need to produce the guitar body, neck and pickguard. Templates are 1/2\" thick MDF produced via CNC machine. These templates were produced by 3D modeling an actual guitar and not from plans found on the internet. In fact, for these thinline templates, we X-Rayed an actual guitar to make sure that the internal cavities were correct. We pride ourselves on craftsmanship and attention to detail. All of the routing done on the top of the guitar body is purposely laid out on one template. This way you know that you are getting the neck pocket perfectly in line with the pickups and bridge mounting holes. We don\'t sell templates that we have not modeled and built ourselves. Our neck pockets fit standard Fender and aftermarket necks perfectly with a nice tight fit... which is exactly what you want for optimal vibration and tone transfer to the body of your finished guitar! Our templates include center lines on the body and neck templates. Nut and fret location are also clearly marked, as well as drill locations for the wire and output jack. An added bonus, which we include, are back profile templates for shaping your neck (1st and 12th fret). These profile templates produce a vintage \"soft V\" neck shape.Note: Fender Thinline guitar cavities are routed from the rear. If you look closely at vintage thinlines, you can see the line where the back is glued on after the internal routing is done. It\'s also obvious when you look inside, through the F-Hole, to see glue squeeze out around the inside of the guitar.Bridge, ferrules and tuners shown in photos are for reference purposes only and not included in the listing. Template Overview
- Body Template
- Made to fit Genuine Fender Telecaster Bridge
- Made to fit Genuine Fender Telecaster String Ferrules
- Pickguard Template
- Neck Template
- Fret and Nut Locations
- Neck Screw Hole Locations
- Neck Shape Profile for 1st and 12th Fret (50s Soft V Profile)
- Center Lines
- For F-Hole, Template uses Amana Tool 47224 - 1/4\" Dia. Flush Trim Template Bit (Not Included)
- For Pickguard Switch Slot, Use StewMac 1/16\" spiral downcut bit, Item #5152
Buy with confidence! Here is some of our recent response:
- Beautiful crafted template kit. All pieces are perfectly cut. Highly recommended
- Very fast shipping! Best templates I\'ve ever seen!
- Perfect template, just as described
- Awesome Seller Perfect in Every Way +A+A+A+A+
- Great seller, honest seller. And took care of all my concerns
- Great product and well packed thank you we\'ll do business again.
Check out our other items!
Make sure that the templates you buy have center lines!! Experienced builders know that it is critical to know where the center line of your instrument is located!
Template sets are made to order and ship within 2 business days... Although I try to keep stock on hand 9 out of 10 times I ship within 24 hours.
All Templates are bubble wrapped and securely packed in an oversized box to ensure safe delivery.
Feel free to contact me with any questions.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.