Texas Instruments 5TI-2001 R/W Programmer Handheld PLC Programming Terminal

Texas Instruments 5TI-2001 R/W Programmer, the handheld programming terminal used with the TI 5TI programmable controller family. Nameplate reads MODEL NUMBER 5TI-2001, SERIAL NUMBER 15RW8506000245, Texas Instruments Inc., Johnson City, Tenn. USA.Features a red LED display, ladder-logic function keys (STR, CTR, TMR, MCR, OUT, NOT, OR, AND), a numeric keypad with INST, ENTR, STEP and READ keys, plus Power Flow and status indicator lamps. The underside carries the original key-function instruction label.Condition: used, pulled from service. The housing shows scratches and handling marks, the keypad overlay is dirty with wear around the keys, and the nameplate is scuffed. The attached cable and molded connector are present and look intact.Sold as-is, untested. No manual, power supply or additional cabling included beyond what is shown in the photos.

Used industrial pull with scuffing and grime on the keypad overlay, scratches on the black housing, and a worn/scratched nameplate. Attached cable with D-sub style connector is present; instruction label on the underside is intact but dirty.

• Scratches on housing
• Dirt/staining on keypad overlay
• Worn and scratched nameplate

• Attached programming cable with connector

• Texas Instruments 5TI series PLC handheld programmer
• Model 5TI-2001 R/W Programmer
• Red LED display window
• Ladder logic keys: STR, CTR, TMR, MCR, OUT, NOT, OR, AND
• Numeric keypad with INST, ENTR, STEP, READ keys
• Power Flow and status indicator LEDs
• Attached programming cable with multi-pin connector
• Made in Johnson City, TN, USA

You are buying exactly what is shown in the photos.