Techne SBL-2D Fluidised Sand Bath High-Temperature Lab Heater Untested
$1,859.99

Techne SBL-2D Fluidised Bath / high-temperature fluidised sand bath. Proserv identification tag: P/N SBL-2D, S/N 49191 18, Receiver #66212. Published SBL-2D literature lists a 50–600°C operating range, approximately 4 kW heating capacity, a working area approximately 9\" diameter x 13.8\" deep, and overall dimensions approximately 15.2\" diameter x 27.4\" high. This unit has the large overspill flange installed. The power plug is marked NEMA L6-20, 20A 250V. A Techne electrical/nameplate is present on the rear; however, the stamped voltage/current values on this particular unit are too faint to verify from the photos. Observed used condition with scuffs, dust/residue and interior discoloration consistent with previous industrial use. IMPORTANT CONDITION NOTE: The outer jacket/sheath of the power cable is visibly frayed/damaged near the chassis entry point. The cable should be inspected and repaired as necessary by a qualified person before the unit is energized. Loose cables/leads/connectors shown in the photos are included as pictured; their exact function and compatibility have not been verified. The Proserv tag states “With 100lb pail ATS1027-150 Aluminum Oxide.” That pail is NOT pictured and its inclusion has not been verified. No external temperature controller, air compressor or basket is pictured. Operational condition is UNKNOWN / UNTESTED. No claim is made that the unit is functional, calibrated, serviceable or ready for use. Please review all photos carefully for physical condition, configuration, markings, included components and any missing accessories. Large/heavy industrial equipment. Actual packaged dimensions and weight should be verified before arranging shipment or freight.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.