Taurus TX22 Carbon Fiber Weighted Backplate & Rate Reducer for FRT
*Patent Pending*
This listing is intended for customers who already know the specific weight they need for their setup.
Hint: Check out my other listing, TX22 ULTIMATE TUNING 4-PACK: Suppressed Rate Reducer/Weighted Backplates, available in three different tuning levels—Master Adjustment, Extended Range, and Maximum Range. Each pack includes multiple weight options for one discounted price, making it ideal if you are still experimenting to find the weight that works best with your suppressor, ammunition, and setup! Link below
TX22 ULTIMATE TUNING 4-PACK: Suppressed Rate Reducer/Weighted Backplates
I cannot guarantee that any specific weight will work with your setup. It is up to you to experiment with the different weight options and determine which one functions best with your firearm, suppressor, and ammunition.Thank you!
Upgrade your Taurus TX22 (.22 LR) with a custom engineered modular weighted backplate and rate reducer designed to add controlled mass to the slide assembly and provide additional tuning options for suppressed setups.
Each internal weight adds approximately 1/4 oz (VIEW WEIGHT CONVERSION CHART FOR ADDITIONAL DETAILS), allowing the system to be configured with different weight tiers depending on the desired setup. This backplate is manufactured from high-strength, carbon fiber reinforced filament and printed at 100% infill for maximum rigidity and durability.
Unlike designs that rely on thin walls or cheap screws, the patent-pending design permanently integrates the weights inside the printed structure. Each weight is tightly encapsulated within the body of the component during manufacturing, creating a solid, one-piece assembly.
Installation is quick and straightforward. The rate reducer installs similarly to a standard rear slide plate: depress the spring-loaded rear assembly, slide the factory backplate out, and install the rate reducer in its place. For removal, insert a thin flathead screwdriver or 1.5 mm Allen wrench into the center groove on the underside of the slide to depress the internal spring-loaded component and pull it away from the Backplate then slide it down. A step-by-step installation and removal video is available at the link below for my own testing with my Rugged Opus, my system runs the best off of 0.25 oz or one added weight (with filament weight: 0.92 oz), and it has run flawlessly ever since I have installed it. But different cans have different pressures so experiment to find your optimal weight.
Understanding the Weights/Conversion Chart
The advertised 0.25 oz, 0.50 oz, 0.75 oz, 1.00 oz, 1.25 oz, and 1.50 oz values refer to the nominal internal added tuning weight.
They do NOT represent the total finished weight of the complete PETG-CF backplate.
The PETG-CF body itself adds additional mass. Additionally, as the internal weight level increases, the cavity required to hold those weights becomes larger. This means there is progressively less PETG-CF material in the higher-weight versions.
Here is the chart with the adjusted weights for anyone who is interested in the specifics:
Added WeightNo Handle Left Handle Right Handle Dual Handle0.25 oz26.00 g / 0.92 oz 29.00 g / 1.02 oz 29.00 g / 1.02 oz 32.00 g / 1.13 oz0.50 oz32.10 g / 1.13 oz 35.10 g / 1.24 oz 35.10 g / 1.24 oz 38.10 g / 1.34 oz0.75 oz38.21 g / 1.35 oz 41.21 g / 1.45 oz 41.21 g / 1.45 oz 44.21 g / 1.56 oz1.00 oz44.31 g / 1.56 oz 47.31 g / 1.67 oz 47.31 g / 1.67 oz 50.31 g / 1.77 oz1.25 oz50.42 g / 1.78 oz 53.42 g / 1.88 oz 53.42 g / 1.88 oz 56.42 g / 1.99 oz1.50 oz56.52 g / 1.99 oz 59.52 g / 2.10 oz 59.52 g / 2.10 oz 62.52 g / 2.21 oz
Normal differences in filament extrusion, print tolerances, embedded weights, and handle geometry may cause small differences between an individual product and the values shown above.
Key Features:
Precision Tuning Weight System: Each numerical weight option directly corresponds to the exact number of 1/4 oz (0.25 oz) weighted segments permanently infused inside the backplate. From 0.25 oz up to 1.50 oz, you will always know your precise mass while dialing in and tuning your slide\'s cycling performance.
Safety Disclaimer
This product is a 3D-printed accessory and, like any manufactured component subjected to repeated impact, vibration, heat, and recoil forces, it can potentially wear, crack, or fail over time. Although extensive testing has included thousands of rounds without a known failure, this does not guarantee that every component will remain intact under every firearm, ammunition, suppressor, or operating condition. A damaged or failed component could separate from the firearm during use and may cause injury, including the possibility of debris or part of the accessory traveling toward the shooter or bystanders. Always wear appropriate eye and hearing protection, inspect the backplate for cracks, deformation, excessive wear, or other damage before use, and discontinue use immediately if any damage is observed. Installation and use are undertaken at the user\'s own risk. No representation is made that this accessory will function safely with every firearm configuration, ammunition type, suppressor, or aftermarket modification. Always follow the firearm manufacturer\'s safety instructions and all applicable laws and regulations.
Compatibility: Taurus TX22 (.22 LR)
Construction: Carbon fiber reinforced filament, 100% infill
Weight Options: 0.25 oz, 0.50 oz, 0.75 oz, 1.00 oz, 1.25 oz, and 1.50 oz
Handle Options: No Handles, Left Handle, Right Handle, or Dual Handles
Firearm and suppressor not included.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.