Taurus TX22 Weighted Backplate 4-Pack + Speed Loader Kit Rate Reducer Suppressed

TX22 TUNING KIT + Speed Reloader - WHAT\'S INCLUDED:- 4 weighted rate reducer backplates (your choice of weight set + handle style)- 1 PB Tactical TX22 Speed Loader - load mags fast, save your thumbsSave $3.99 vs. buying separately. Everything ships together in one package!

Patent Pending

Take the guesswork out of finding the right weight for your suppressed (FRT) Taurus TX22 with the TX22 Ultimate Tuning 4-Pack.

Unlike designs that rely on thin walls or cheap screws, the patent-pending design permanently integrates the weights inside the printed structure. Each weight is tightly encapsulated within the body of the component during manufacturing, creating a solid, one-piece assembly.

Each pack includes FOUR complete weighted backplates/rate reducers at different weight levels for one bundled/discounted price, allowing you to test multiple configurations and determine what works best with your firearm, suppressor, and ammunition.

Installation is quick and straightforward. The rate reducer installs similarly to a standard rear slide plate: depress the spring-loaded rear assembly, slide the factory backplate out, and install the rate reducer in its place. For removal, insert a thin flathead screwdriver or 1.5 mm Allen wrench into the center groove on the underside of the slide to depress the internal spring-loaded component and pull it away from the Backplate then slide and click the rate reducer in! A step-by-step installation and removal video is available at the link below for reference:

0.25 / 0.50 / 0.75 / 1.00 oz

Best starting point for most customers.

Choose this pack if you:

• Are tuning a suppressed TX22 for the first time

• Do not know what weight your setup prefers

EXTENDED RANGE PACK

0.50 / 0.75 / 1.00 / 1.25 oz

Best middle-to-heavy tuning range.

Choose this pack if you:

• Have already tried lighter weights

• Are still experiencing cycling or trigger-reset issues

MAXIMUM RANGE PACK

0.75 / 1.00 / 1.25 / 1.50 oz

Best for setups already known to prefer heavier added mass.

Choose this pack if you:

• Have already tested lighter configurations

• Have a setup that runs best at 1.5 oz added weight or above

If you are unsure where to start, I recommend the Master Adjustment Pack.

Which Suppressor?

Common TX22 suppressors include the Rugged Oculus 22, Dead Air Mask, SilencerCo Sparrow 22, OCL Titanium, HUXWRX FLOW 22 Ti, YHM rimfire suppressors, and similar .22 LR suppressors.

Suppressor brand or weight alone cannot determine which backplate weight will work best. Firearm tolerances, ammunition, optics, lubrication, and other modifications can all affect function.

In my own testing with a Rugged Oculus, my TX22 FRT runs best with the 0.25 oz added-weight configuration, approximately 26 g / 1.02 oz total with one handle.

I cannot guarantee that any specific weight or pack will function optimally with your setup. These packs are designed so you can experiment with multiple weight levels and determine what works best for your firearm, suppressor, and ammunition.

Understanding the Weights/Conversion Chart

The advertised 0.25 oz, 0.50 oz, 0.75 oz, 1.00 oz, 1.25 oz, and 1.50 oz values refer to the nominal internal added tuning weight.

They do NOT represent the total finished weight of the complete PETG-CF backplate.

The PETG-CF body itself adds additional mass. Additionally, as the internal weight level increases, the cavity required to hold those weights becomes larger. This means there is progressively less PETG-CF material in the higher-weight versions.

Here is the chart with the adjusted weights for anyone who is interested in the specifics:

Added WeightNo Handle Left Handle Right Handle Dual Handle0.25 oz26.00 g / 0.92 oz 29.00 g / 1.02 oz 29.00 g / 1.02 oz 32.00 g / 1.13 oz0.50 oz32.10 g / 1.13 oz 35.10 g / 1.24 oz 35.10 g / 1.24 oz 38.10 g / 1.34 oz0.75 oz38.21 g / 1.35 oz 41.21 g / 1.45 oz 41.21 g / 1.45 oz 44.21 g / 1.56 oz1.00 oz44.31 g / 1.56 oz 47.31 g / 1.67 oz 47.31 g / 1.67 oz 50.31 g / 1.77 oz1.25 oz50.42 g / 1.78 oz 53.42 g / 1.88 oz 53.42 g / 1.88 oz 56.42 g / 1.99 oz1.50 oz56.52 g / 1.99 oz 59.52 g / 2.10 oz 59.52 g / 2.10 oz 62.52 g / 2.21 oz

Normal differences in filament extrusion, print tolerances, embedded weights, and handle geometry may cause small differences between an individual product and the values shown above.

Key Features:

• Precision Tuning Weight System: Each numerical weight option directly corresponds to the exact number of 1/4 oz (0.25 oz) weighted segments permanently infused inside the backplate. From 0.25 oz up to 1.50 oz, you will always know your precise mass while dialing in and tuning your slide\'s cycling performance.

• Handle Configurations: Choose from minimalist clean profiles (No Handles), single-sided charging handles (Left or Right), or full dual-sided charging handles for maximum leverage and easy manipulation.

• Lightweight Carbon Fiber Construction: 3D-printed using high-performance carbon fiber composite for exceptional strength-to-weight ratio and a sleek, tactical matte black finish.

• Drop-In Fit: Engineered specifically for the Taurus TX22 platform for a seamless, secure installation replacing the factory rear plate.

Safety Disclaimer

This product is a 3D-printed accessory and, like any manufactured component subjected to repeated impact, vibration, heat, and recoil forces, it can potentially wear, crack, or fail over time. Although extensive testing has included thousands of rounds without a known failure, this does not guarantee that every component will remain intact under every firearm, ammunition, suppressor, or operating condition. A damaged or failed component could separate from the firearm during use and may cause injury, including the possibility of debris or part of the accessory traveling toward the shooter or bystanders. Always wear appropriate eye and hearing protection, inspect the backplate for cracks, deformation, excessive wear, or other damage before use, and discontinue use immediately if any damage is observed. Installation and use are undertaken at the user\'s own risk. No representation is made that this accessory will function safely with every firearm configuration, ammunition type, suppressor, or aftermarket modification. Always follow the firearm manufacturer\'s safety instructions and all applicable laws and regulations.

Compatibility: Taurus TX22 (.22 LR)
Construction: Carbon fiber filament, 100% infill
Weight Options: 0.25 oz, 0.50 oz, 0.75 oz, 1.00 oz, 1.25 oz, and 1.50 oz
Handle Options: No Handles, Left Handle, Right Handle, or Dual Handles

Firearm and suppressor not included. THANK YOU!