Tabletop Stand Compatible with Nebula Capsule 3 Laser
- AIM FROM YOUR TABLE — When your projector needs tabletop support and the picture needs a different angle, give it a cradle that tilts instead of settling for where the image lands. This stand supports your projector on your table while you change its angle toward your viewing surface, so you set up your next movie with the picture aimed where you want to watch.
- CONTROL FROM BOTH SIDES — Set your projector\'s tilt with a knob at each side of the cradle, keeping the angle adjustment right at the stand while you line up the picture. For assembly, push the bolts through the cradle and stand from the inside; their hex heads seat in recessed cradle cavities, and the two knobs thread onto the bolts to complete those connections.
- LOCK IN YOUR PROJECTOR — Once your projector is seated in the cradle, place the crown over the top before you settle in for an evening of viewing. The crown and cradle have tapered mating shapes that wedge together to lock your projector in place, so you finish your setup with a retaining connection at the top as well as the cradle supporting it below while you watch the picture.
- CHOOSE THE RIGHT FASTENERS — Choose the recommended bolt lengths for your plastic stand so their ends do not protrude past the knobs; longer bolts work, but their ends stick out at the sides. You supply two M6x16 or M6x20 bolts with 10mm hex heads and, for the optional bottom attachment, a very short ¼-20 tripod screw; these fasteners are not included.
- REACH THE BOTTOM — Tilt the cradle to reach the underside of your projector when you want to use the optional bottom attachment, rather than trying to work beneath it at its viewing angle. A very short tripod screw secures your projector to the bottom of the cradle, giving you another attachment point before you finish positioning it and fit the crown for your next viewing session. WHAT\'S IN THE BOX — Only the item named in the title. No hardware is included (see the description).
Your projector is on the table, but the picture is not aimed where you want it. Give your viewing setup a stand that lets you change the angle instead of settling for the image\'s position.
This tabletop stand holds your projector in a cradle inside the stand. Tilt the cradle to aim the projected image toward your viewing surface, then fit the crown over the top to lock your projector in place. The crown and cradle are tapered where they meet, so they wedge together to make the retaining connection. Your projector gets dedicated support for tabletop viewing, with angle adjustment built into the stand.
The cradle connects to the stand on both sides. For assembly, push the bolts through from the inside so their hex heads sit in the recessed cavities, then thread the two knobs onto the bolts. Choose the recommended bolt lengths for ends that do not stick out past the knobs. Longer bolts also work, but the extra length protrudes from the sides.
If you want a bottom attachment as well, tilt the cradle to reach the underside of your projector and use a very short ¼-20 tripod screw to secure it to the cradle. This attachment is optional; the tapered crown is the top retaining piece.
For projector owners who like a table-based viewing setup, the stand puts support and tilt adjustment together where you watch. Set it on your table for an evening movie, position your projector, and choose the angle that points the image toward your viewing surface. The plastic parts form a cradle to support your projector, a crown to hold it in place, and knobs at the sides for setting up your view.
HARDWARE NOT INCLUDED: Only the item named in the title is in the box. Every setup is different: depending on yours, mounting it or attaching it to an existing part may use hardware you already have, such as the original screws, or you may need to buy your own screws, bolts, tape or adhesive to suit your situation. No hardware of any kind is included with this listing.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.