TRS-80 Model 4 Motherboard - Tested OK
$120.00

Tested Ok:The TRS-80 Model 4 Motherboard is a vintage computer component that is highly sought after by collectors and enthusiasts of vintage computing. This motherboard, made by Tandy Radio Shack, was used in the TRS-80 Model 4 computer, known for its compact size and programmable capabilities. With its retro design and historical significance, this motherboard serves as a valuable piece of technology from the early days of personal computing.
Refurbishment & Reliability Upgrade Note:The factory 20-pin Mylar jumper ribbons and original FFC sockets on this motherboard have been proactively replaced with standard 0.100\" (2.54mm) pin headers and a reliable ribbon cable assembly. Because the original 1980s Mylar flex cables are a well-known failure point on the TRS-80 Model III due to delamination and broken traces, this standard community-accepted upgrade ensures a solid, long-lasting electrical connection. All rework was completed carefully with clean solder joints (see close-up photos of the board underside), and the motherboard has been thoroughly tested and verified to be in full working order.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.