|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
TELEX DIGITAL MATRIX INTERCOM RTS KP-832-20 KP-832 W/ POWER ADAPTER
$379.99

General / Mechanical Rackmount: 19\" chassis, 2 RU high Depth behind front panel: ~ 90 mm (≈ 130 mm including connectors) Weight: ~ 6.3 lb (≈ 2.85 kg) Operating temperature: –10 °C to +41 °C Storage temperature: –40 °C to +60 °C Power: External switching supply, universal input (100–240 VAC, 50/60 Hz) Dimensions (approx): 482.6 mm W × 76.2 mm H × 90 mm D
Keys / Display / User Interface 20 lever keys for intercom talk/listen (in the 20-position model) Additional keys: 1 for “call waiting respond/clear,” and 1 for headset/microphone/program switching Keys support latching (hands-free) and momentary (push-to-talk) operation Large LCD displays per key, backlit, allowing 8 characters per lever key Enhanced programming keypad, with scrollable menu system and prompts
Audio / Mic / Headset / SpeakerMicrophone Preamplifier Panel mic (electret): –42 dB, 150 Ω @ 1 kHz Headset mic (dynamic): –50 dBm, 150 Ω @ 1 kHz Maximum voltage gain (mic → line): ~ 70 dB Frequency response: 100 Hz – 10 kHz (±2 dB) Limiter: ~ 8 dB above nominal
Tone Generator Headphone / Headset Amplifier Maximum voltage gain: ~ 10 dB Frequency response: 100 Hz – 10 kHz (±2 dB) Acceptable headphone impedance: 8 to 600 Ω Output power: ~ 300 mW into 50 Ω Maximum output voltage: ~ 8 V peak-to-peak Sidetone: up to 25 dB or mute
Speaker Amplifier & Internal Speaker Maximum gain: ~ 25 dB Frequency response: 100 Hz – 10 kHz (±2 dB) Output power (each amp): 4 W into 4 Ω Maximum output voltage: ~ 12 V peak-to-peak Volume control range: ~ 52 dB Speaker rating: 4 W max
Intercom / Line Interface Connectors & Expansion Panel mic: ¼″ phone jack, 3-circuit Headset connector: 5-pin XLR (dynamic mic + left/right headphone) Intercom connectors: DB9S and RJ-12 (parallel wired) Power input: 5-pin locking DIN (carries ±15 V, +5 V, common) Expansion connector: RJ-45 LCP (Local Control Panel) connector: RJ-45 Optional modules: GPI/Connector module, CSI-100 coax module, EKP-832 expansion keypad

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|