TECHTONGDA Automatic Round Bottle Label Applicator Fixed Point Labeling 110V

新建网页 3

TECHTONGDA®

　 　

LT-150 Fully Automatic Desktop Chain Plate Conveyor Round Bottle Fixed

Point High Speed Coding and Labeling Machine with 42.9x3.93inch

Conveypor 20-30PCS/min Speed

　 　

　 　

Overview:

　

　

The machine is beautiful,smart,and has a high qualification rate. It is suitable for labeling and coding in

cosmetics,beverages,food,and other industries.

The design of the machine is novel and unique,and the operation and adjustment are very convenient. The

operator only needs to place the bottle on the conveyor belt,when the bottle moves forward,the cursor will

automatically label and mark the bottle after detecting it.

It can be used for both stand-alone production and online production.

　 　

　 　

Parameter:

　

　 Voltage 110V Label Outer Diameter 9.44in(24cm) Power 800W Suitable Bottle Diameter 0.78-4.72in(2-12cm) Material The surface is stainless steel Label Height 0.98-5.9in(2.5-15cm) Conveyor Width 3.93in(10cm) Label Length 0.98-13.78in(2.5-35cm) Conveyor Belt Length 42.9in(109cm) Precision 20-30PCS/min (Depending on the bottle size and label length) Label Inner Diameter 2.95in(7.5cm) Label Out Left offer 　 　

　 　

Operating Steps:

　

　

1.Checking that the device\'s power supply is 110V and ensure a stable power supply,turn on the air compressor and make sure the pressure gauge reaches 0.6MPa (Note: The air compressor must be provided by the user),check whether mechanical components such as the conveyor belt are stuck by foreign objects and ensure all components operate flexibly.

2.Confirm the front and back of the label,wind the label as shown in the manual and fix the end of the label, adjust the guide rings and lock the relevant wheels,press the \"Label Length\" key and adjust the labeling parameters via the photoelectric eye.

3.Using the label head lifting handle to adjust the host height,adjust the wheel auxiliary mechanism to a slightly clamped state and adjust the belt tightness,calibrate the photoelectric eye to ensure the light is off when detecting labels and on when detecting materials.

4.Operating via the touch screen,set parameters such as interval time and label output protection as needed, and perform tests when necessary to select appropriate parameters.

5.After starting the equipment,the optical fiber senses the material,and after a delay,completes actions such as bottle fixing and label output,with the equipment counting automatically.

6.In case of abnormalities and shutdown,troubleshoot according to the instructions,and the interval between power on and off must exceed 30 seconds.

Note：The coding machines of the two above-mentioned colors will be shipped randomly (they only differ in color, with completely identical functions).

　 　

　 　

Features:

　

　 Multi-rod spiral positioning prevents deviation and makes the sheet more accurate.

Adding vertex style bottle holding labeling effectively solves the problem of bubbles during the product labeling process. The labeling is flat and wrinkle free,and can be applied.

Adjusting the two handles clockwise can move the spoke pressure plate forward and upward.

The label object is sensitive to inspection,and the labeling efficiency is greatly improved.

Photo-electric detection label,and the label will be released immediately when the bottle is detected to pass.

This machine is equipped with a fiber optic amplifier,which can be adjusted by adjusting the fiber optic amplifier when the photosensitive eye cannot sense the product well.

This machine is equipped with a touch screen display,which allows customers to set relevant data according to their needs,making it more convenient and efficient.

This machine is equipped with an emergency stop button, which can stop the operation of the machine with one click in case of any emergency, making it safer and more reliable.

This machine is equipped with a high-quality conveyor belt motor, which is more durable.

This machine is equipped with a chain plate conveyor belt,which is more wear-resistant and has a longer service life.

This machine needs to be connected to an air compressor for use (we only provide the machine and do not provide an air compressor,which needs to be purchased by the customer)

The word to be printed is placed in the word seat to realize the printing function.

This machine is equipped with a coding machine, which can achieve coding function.

　 　

　 　

Precautions:

　

　 　 To ensure safe production, please read the following precautions carefully:

1. Use the power supply that meets the requirements of the machine.

2. After turning off the power switch, there is still voltage in some circuits in the electrical control of the machine. When servicing the control circuit, be sure to unplug the power cord.

3. Do not touch the rollers with your hands during machine operation, and pay attention to personal safety.

4. When the machine has problems, press the emergency stop button directly to suspend all work.

5.Do not touch the photoelectric induction eye with your hands during machine operation to prevent the machine from missensing and mislabeling.

　 　

Item Included:

　

　 1 PCLT-150 Fully Automatic Desktop Chain Plate Conveyor Round Bottle Fixed Point High Speed Coding and Labeling Machine 160235 　 　

Shipping & HandlingDetails

Default Shipping Cost or Free Shipping Information:

▲Default shipping cost or free shipping service is only for the lower48 United States by UPS Ground or USPS. Other areas or needs othershipping ways, please contact us.
▲Buyers from Guam, Puerto Rico,Virgin Islands,American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses orothercountries/areas,there WILLbe extra shipping costs,please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.

Return / Refund

If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products

▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

Warranty & response

▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.

On Oct 14, 2025 at 20:11:04 PDT, seller added the following information: