|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
System Sensor SWLED - Wall Mount Strobe Only - White
$38.00

System Sensor SWLED — L-Series with LED indoor wall strobe, white housing with FIRE lettering, 2-wire. System Sensor bulletin M23.2SS names SWLED as the direct replacement for the xenon SWL. The LED optic draws roughly 40 percent less current on average across the candela range, which is what lets more appliances share a notification appliance circuit without a larger power supply. - Field-selectable wall candela settings of 15, 30, 75, 95, 110, 135 and 185
- Strobe current from 18 mA at 15 cd to 120 mA at 185 cd over the 16 to 33 V range
- Regulated 24 VDC nominal; one flash per second; rotary candela switch
- DVM test points on the face allow a voltage reading without removing the appliance
- Electrically compatible with legacy SpectrAlert, SpectrAlert Advance and L-Series devices
- Terminals take 12 to 18 AWG; rated 32°F to 120°F, 10 to 93 percent non-condensing
Siblings differ by a character or two: SRLED is red, SWLED-P has no FIRE marking, SWLED-B is bilingual FIRE/FEU, SGWLED is the compact housing and P2WLED adds a horn. Ceiling model SCWLED carries a different candela set.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|