Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

Synthrotek Case Power PCB & Panel DIY Eurorack Power Distribution

Synthrotek Case Power PCB & Panel DIY Eurorack Power Distribution
$32.99

Buy Now

Please Note: This is only a PCB & Panel combo. You will need to buy components, populate the board and solder it together yourself.
Case Power is a marriage of the 5A Power Supply System (now further regulating the +12V rail) and the Noise Filtering Distribution board, resulting in a love child called Case Power. It is safe, clean, quiet, and will power small and large Eurorack systems. Connecting Case Power to your current bus board system is easy with molex or spade connectors.
Features:
  • Advanced low-noise, fully regulated voltage converters on each rail
  • Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
  • Noise filtering capacitors are placed in two sections on the board to help minimize module to module noise
  • Eighteen 16-pin Eurorack power connections, keyed for safety
  • Molex connector for daisy chaining Synthrotek distribution/bus boards
  • Spade connectors for connecting other manufacturers’ bus boards
  • Screw clamp headers for power entry wiring and daisy-chaining an additional Case Power
  • LED status indicator for each rail (+12V, -12V, +5V)
  • Protective cover over converters
  • Eight mounting holes for screwing into your case(spacers and screws included)
  • Optional1Uor3Ubacklit Eurorack panels with on/off switch (2.1mm barrel)
  • Screw clamp headers for power entry wiring and daisy-chaining an additional Case Power
  • Fits an 84HP case or larger
  • Dimensions: 14⅞ x 1⅜ (37.8 x 3.5cm) height: 22mm (spacers add 3mm)
Requires a 16-19V 90W center-positive power brick (sold separately). The brick does not plug directly into Case Power; you will either need to wire the board into your case or use a Power Panel.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design