SwitchBot Bot Momentary Switch Mount PC Computer Mining Rig Garage Door MORE

Adapt your SwitchBot Smart Bot to activate a momentary switch! If you\'ve ever wanted a reliable way to TURN ON, TURN OFF, or RESET any device that uses a momentary switch such as a Computer, Crypto Mining Rig, Garage Door, etc. from any remote location anywhere in the world then this is it!
Simply insert your Switchbot Smart Bot, insert the momentary switch, connect the leads on the switch to your device, and you\'re set! This adapter mount uses a standard 2-pin momentary switch (8.5mm length, 8.5mm width, 8mm height) as found on most PC cases. ONE FREE PC POWER SWITCH IS INCLUDED! 2 screw holes allow for mounting this adapter on any flat surface.I designed this adapter to give flexibility in regards to the switch because the head on the replacement switch may not be exactly the same height. You will want to adjust the depth of the momentary switch and move it into the best position. I would test it in a few positions to find the smoothest activation point. If you push the switch in too far you can use a small screw driver or punch to push it back out from the back side. I\'ve rigorously tested this design on 6 Smart Bots, activating each of them between 15-20 times per week for 3 years with zero issues or failures.Note: SwitchBot Smart Bot pictured is for demonstration purposes only and is NOT included. If you don\'t already have one, you will need a SwitchBot Hub (not included) if you want to access the Smart Bot over the internet. I\'ve found these to be extremely reliable and durable devices. You can purchase your SwitchBot Smart Switch and Hub directly from the manufacturer (I do not sell those).