Spiegler Performance Parts • Hand-Assembled in Dayton, Ohio, USA
Spiegler Stainless Steel Front Brake Line Kit – 5-Line Original Routing, ABS II
Fits BMW R1150RT 2004
Firm lever. Confident stops. Zero guesswork. Spiegler lines replace soft, aging rubber hoses with a precision-built, DOT- and TÜV-approved system engineered for riders who demand more from every squeeze of the lever and every press of the pedal.
Factory rubber hoses swell under pressure, and that swelling is what you feel as a spongy, inconsistent lever. Spiegler eliminates it. Every line pairs a low-expansion DuPont PTFE (Teflon) core with a tight-weave stainless steel braid, then finishes it with aircraft-grade stainless steel fittings and Spiegler’s own patented Torsion Fitting System. The result is crisp, repeatable feel and modulation you can trust, from the daily commute to the last lap of a track day.
Note Regarding Shipping: Brake lines cannot be shipped FedEx and will arrive separately from other items ordered!
What Sets Spiegler Apart
Spiegler banjo fittings rotate up to 180° or 360° even after assembly. No twisted lines, no fighting the hose into position. Just align the fittings stress-free and route the line cleanly, without damaging the hose.
A low-expansion DuPont PTFE core sits inside a tight-weave stainless steel braid. Unlike rubber hoses or inferior braided lines, it resists swelling under pressure, keeping your brake lever, pedal, or clutch lever firm and responsive.
A protective PVC sheath covers the braid, keeping dirt and road grit from wearing down the line and stopping the metal braid from scratching your paint, fork tubes, or bodywork.
No cheap carbon steel or low-grade hardware that corrodes or fails over time. Spiegler fittings are built from aircraft-grade stainless steel for strength and long-term durability.
Every kit is DOT-compliant (FMVSS 106) and TÜV approved, meeting rigorous independent laboratory testing standards that many competing brands, some labeled “race use only,” don’t.
For track and specialized builds, Spiegler’s Rennsport kits run a single line from the master cylinder to a T-fitting, then down to each caliper, avoiding the clutter and clearance issues of stacked dual banjo bolts at the master cylinder. Rennsport kits are sold separately; see the product title for this kit’s configuration.
Every Spiegler kit is hand-assembled in Dayton, Ohio. This listing is for clear lines with silver fittings, a clean look that suits almost any bike, made to the standard length for the fitment shown in the title.
Interested in custom colors? Spiegler offers more than 130 line and fitting color combinations. Send us a message for more information.
At a GlanceBrandSpieglerLine ConstructionTight-weave stainless steel braidInner LiningLow-expansion DuPont PTFE (Teflon)Outer CoverUV-resistant PVC protective coatingFittingsAircraft-grade stainless steel with patented Torsion Fitting System (180°/360° rotation)CertificationsDOT compliant (FMVSS 106) • TÜV approvedAssemblyHand-assembled in Dayton, Ohio, USAColorClear lines with silver fittingsWarrantyLimited lifetime warranty, original owner, first vehicleFitment & Configuration
This product is for the specific make, model, year range, position (front, rear, or clutch), and number of lines shown in the product title. Please confirm fitment against the details on this page before ordering.
Original routing follows your bike’s factory line layout. Alternative routing uses a different layout from stock for a cleaner or performance-oriented setup. The routing for this kit is listed in the product title.
Backed for Life
Spiegler stands behind every kit with a limited lifetime warranty for the original owner on the first vehicle.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.