3 O.D. axle tubes with 51\" flange-to-flange width (56\" assembled width) Ford 9 Inch Pinion-Centered Rear End Axle Housing, 56" Width Sku # 91047256 Mfr. Part # 91047256 Condition New Brand Speedway Motors Sold Each Details
Looking for a budget-friendly, rock-solid foundation for your custom rear suspension? Look no further. Our fabricated steel Ford 9 inch axle housings feature all-new components for maximum durability. It’s an evolution of the rugged and reliable 9 inch Ford platform.
Designed with the Muscle Car Builder in Mind
This housing is pinion-centered with unequal-length axle tubes, side-to-side. So driveline alignment is much easier. Unlike factory stamped housings, these fabricated plate-steel center sections provide a wide, flat surface for easy bracket attachment. Note that the pinion-centered design will offset the pumpkin to the driver side.
Axle tubes are 3” O.D. with a 3/16” wall thickness. Heavy-wall tubes, along with a larger center section, significantly reduce distortion during welding of rear-link brackets or spring pads. Billet steel “New Big Ford” (Torino) style bearing ends are fixture-welded (3.150” O.D. bearing, with 2.50” axle flange offset).
Improved Design for Greater Durability
In addition to the heavy-duty bearing ends, the axle tubes are supported with bracing inside the large center housing. This reduces flex in the rear end housing, which is something you won’t find on stamped factory 9 inch housings. Plus, gears stay well-lubed and run cooler thanks to a large-capacity fabricated center (holds more gear oil than stamped housings). Axle is vented on the driver’s side.
Yet, with improved durability, our fabricated axle housing is on average 2 pounds lighter than stock style housings of the same size! Add your choice of axle shafts and third member (sold separately), and you are ready to roll. Equip your race car, hot rod or 4X4 with Ford 9 inch parts from Speedway Motors to ensure there are no weak links in your driveline combination.
Total wheel-to-wheel mounting surface width is 56\" (from hub-to-hub). The pinion is centered in the housing, which puts the pumpkin offset from center. This housing includes (8) T-bolts for the axle bearing retainer plates and (10) studs for the third member.
- Fabricated steel center section
- 3\" O.D. axle tubes with 3/16\" wall thickness
- Axle tubes are internally reinforced for additional strength, less flex
- Billet steel \"New Big Ford\" (Torino) style bearing ends
- Accepts brake kits for 2.50\" axle shaft flange offset (from housing flange)
- Housing measures 51\" from flange-to-flange
- Assembled rearend measures 56\" from hub-to-hub (axle flange face-to-face)
- Improved design weighs only 39.8 lbs vs 41.6 lbs stock-style fabricated housings
- Centered pinion with offset pumpkin for improved driveline angles
- Greater-than-stock capacity center section holds more gear oil and runs cooler
- Includes vent on driver side axle tube
- Includes studs for 3rd member and 3/8” T-bolts for bearing retainer plates
Specs MFG. Part # 91047256 Hub-to-Hub Width 56.00" Flange-to-Flange Width 51.00" Tube O.D. 3.00" Material Type Steel Sold in Quantity Each Notes Assembled rear end (axle flange face-to-face) width is 56" Standard Pinion Location Centered Pinion / Offset 3rd Member Reviews Yep Rated by Bob on September 20, 2026
Summary: Worked great
Yes, I recommend this product.
That's a good one Rated by Fast on September 12, 2026
Summary: That's a good one
Yes, I recommend this product.
I would buy again Rated by Td on March 19, 2024
Summary: I put this in my 36 chevy 2 door sedan fit perfect
Yes, I recommend this product.
I have purchased from this company several times Rated by Roster on April 07, 2023
Summary: Quality products at a good price always receive Exactly what you ordered on time.
Yes, I recommend this product.
Related Items / Suggested Parts Speedway Ford 9 Inch Pinion Centered Axle/Housing Kit, 56 Inch Tanks REFD Rear End Filler and Drain Kit 9 Inch Ford Rearend Axle Housing 3rd Member Pumpkin Gasket Third Member Mounting Hardware, Ford 8 In/ 9 In Rear End Currie CE-98126-25250 9 Inch Ford 31 Spline Axle Shaft, 25-1/4 Inch Currie CE-98132-29625 9 Inch Ford 31 Spline Axle Shaft, 29-5/8 Inch Ford 9 Inch Limited Slip Posi Differential Third Members, Clutch Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake Caliper Tech Support We\'re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 74 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.