Sommerfeld 3-Pc Cove Raised Panel Set

Sommerfeld 3-Pc Cove Raised Panel Set

Craft beautiful professional-looking raised panel door for cabinets and furniture.

• All three bits in the set are perfectly matched in height for fast, no-hassle set-ups.
• Full 1/2\" engagement on rail and stile for stronger joints and easiesr measurements of door part dimensions.
• New Patent Pending designed radiused-corner-geometry on our Rail & Stile bits relieves stress as it prevents the edge tear-out that is a common problem with other brands.
• The raised panel cutter is the largest diameter in the industry at 3 1/2\". It includes a back cutter, which allows machining of the front and back of the panel in the same pass, giving you exactly the thickness you need for the panel to fit exactly in the stile and rails.
• An additional 5/8\" diameter bearing is included to allow you to make two separate passes when doing arched raised panel work. If you are making arched or curved raised panels the large bearing that it comes with allows you to make half the cut since there is no fence involved. Aft the first cut you can change to the small bearing to finish the cut. If you are doing straight raised panels, you can go immediately to the small bearing and take 2 passes by simply moving the fence.
• Machines materials from 3/4\" to 7/8\" thick.
• Bearings for Raised Panel Panel Cutter are HC318DZZand 688ZZ
• Bearings for the Rail & Stile are 698ZZ and 608ZZ.

Product Details BrandSommerfeld\'s Tools For WoodColorGoldSize1/2 inch shaftStyleCoveManufacturerSommerfeld\'s Tools For WoodProduct TypeJoinery Router BitsMpn03001

• Full 1/2\" engagement on rail and stile for stronger joints and easiesr measurements of door part dimensions.
• All three bits in the set are perfectly matched in height for fast, no-hassle set-ups.
• The raised panel cutter is the largest diameter in the industry at 3 1/2\". It includes a back cutter, which allows machining of the front and back of the panel in the same pass, giving you exactly the thickness you need for the panel to fit exactly in the stile and rails.
• An additional 5/8\" diameter bearing is included to allow you to make two separate passes when doing arched raised panel work. If you are making arched or curved raised panels the large bearing that it comes with allows you to make half the cut since there is no fence involved. Aft the first cut you can change to the small bearing to finish the cut. If you are doing straight raised panels, you can go immediately to the small bearing and take 2 passes by simply moving the fence.
• New Patent Pending designed radiused-corner-geometry on our Rail & Stile bits relieves stress as it prevents the edge tear-out that is a common problem with other brands.

Powered by