Solar Mega Roofblaster for 3.5" Ribbed Conex Container (White)

• Store
• New Arrivals
• Add to Favorite
• View response
• Contact

Solar Mega Roofblaster for 3.5" Ribbed Conex Container (White)Description Product description Shipping Containers need Shipping Container Vents!

Our Solar Blaster Conex line of accessories bring ventilation and lighting solutions to shipping containers that are being used for storage or work spaces. Breathe fresh air, help protect your belongings from the build up of hot air & moisture, and bring natural sunlight into your container.

Shipping Container vents are one of the most helpful shipping container accessories that exist! Bring fresh air in and get the hot air out! Ventilation Solution for Shipping Containers

Finally Vents for Your Shipping Container

We have taken our very popular Solar RoofBlaster vent fan and designed a special all-metal, form-fitting flashing that will sit flush on top of a shipping container! The vent itself always works as a passive vent 24 hours a day, rain or shine.

Measuring Shipping Container\'s Rib Size BEFORE you buy

Rib Size of your Shipping Container

It is critical that you measure the top most flat portion of the raised ribs on your shipping container. We offer two rib sizes: 3.5\" and 6.5\" products. See below for how to measure your shipping container\'s ribs. This is a very important step BEFORE ordering any of our Conex products.

Our Solar Roof Vent Fans blast out Hot Air!

When the sun is shining, it will power up the fans to help boost the effectiveness of removing the hot air building up inside your steel shipping container. We offer two different sized solar roof vent fans for all of our products. We suggest one solar fan every 8-10 feet. There is no need for an off/on switch. When the sun is shining on the panel, the vents will do their job. At night, the vents still allow air movement passively.

Don\'t forget the Intake Vents!

Intake Vents are crucial

The key to ventilation is uniform air movement across the space you are trying to vent. Placing our 2.5\" intake vents low on the shady side of your shipping container will bring cooler air in to help push the hot air out through the vents. You need intake vents to make this magic happen so do not forget this shipping container accessory.

BEFORE YOU BUY - MEASURE YOUR CONTAINER\'S RIB SIZE 3.5\" Rib Size

Measure the top-most flat section of your shipping container\'s raised ribs where you plan to install our ventilation product. The image above shows a 3.5\" rib size.

6.5\" Rib Size

This image above shows a 6.5\" rib size. This size is less common than the 3.5\" rib so please do NOT skip this step! Measure! Measure! Measure!

Measure the valley too!

Next, place a flat edge across two of your container\'s raised ribs and measure the height. It should be about ¾ of an inch.

Now Choose the Product

Now that you know your measurements, you can choose the correct product for your specific shipping container.

Solar Blaster\'s line of Shipping Container Vents is the ultimate shipping container accessory. Get rid of trapped heat and moisture in a Conex shipping container. This accessory is an ideal ventilation solution for your Conex shipping container. Unlike the plastic vents on the market, this metal solar roof vent fan solution is designed to last.

CONTENTS INCLUDE:

• The Solar RoofBlaster Fan comes pre-installed on an 8\" metal can roof vent with metal flashing that has been designed to fit a shipping container\'s ribs that measure 3.5\" or 6.5\" ribs when measuring the top flat portion of the roof rib.
• A solar panel (25-year rated panel) is attached to the top of the metal vent hood by four unique, stainless steel clips and is wired to a two-ball bearing, high speed fan that is rated for 50,000 hours.

HOW MANY VENTS DO I NEED? We suggest one vent for every 8-10 feet.

BENEFITS: Cool air will come in from intake vents and will exhaust out of the Solar RoofBlaster vent. This uniform air movement helps keep your container cooler and more dry.

DOES THIS FAN INCLUDE A THERMOSTAT OR ON/OFF SWITCH? No, it is not needed. Ideally, the fan should run in the summer to remove excessive heat, and in the winter to remove moisture to prevent condensation. And whenever the sun isn\'t out, the vents will still work passively since hot air always rises.

We offer adjustable solar panels as well in case your shipping container vent needs to point more toward the sun

Depending on where your shipping container is located, you may decide that a solar roof vent that has the ability to tilt the panel toward the sun may be even more effective. Solar Blaster has you covered! We also now offer a side-mounted adjustable shipping container vent.

No matter what your needs are -- we likely have the shipping container accessory you need.

Be sure to check out our store to find other shipping container accessories like our tubular skylights.

We are always available to discuss your shipping container\'s needs. So feel free to reach out to us.

Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.2 out of 5 stars 126 3.9 out of 5 stars 30 5.0 out of 5 stars 3 5.0 out of 5 stars 1 3.6 out of 5 stars 7 — Price $199.99$199.99 $204.99$204.99 $224.99$224.99 $314.99$314.99 $274.99$274.99 $319.99$319.99 Rib Size 3.5\" 3.5\" 6.5\" N/A 6.5\" 6.5\" 80mm/32.5cfm Fan ✓ ✓ ✓ no data no data no data 120mm/96cfm Fan no data no data no data ✓ ✓ ✓ 4.5W Solar panel ✓ ✓ ✓ no data no data no data 5W Solar panel no data no data no data ✓ ✓ ✓ Adjustable no data no data no data ✓ no data ✓ Vent Color Galvanized White Galvanized White Galvanized White Mount Roof Roof Roof Side Roof Roof

• FITS 3.5 INCH CONEX ROOF RIBS: Form-fitted flashing sits on one raised roof rib of a shipping container. Measure the flat top of your rib before ordering. 6.5 inch rib version sold separately. Not for shingle or standard metal shed roofs.
• SOLAR POWERED, NO WIRING: A 5W monocrystalline panel (25-year rated) runs the fan whenever the sun is out. No electrician, no switch, no power bill. At night it still works as a passive vent so rising hot air can escape.
• 96 CFM WITH INTAKE VENTS: 120mm double ball bearing fan, 2600 rpm, 42.6 dBA, rated 50,000 hours. With low intake vents it refreshes a 1,000 cu ft space about every 10.4 minutes. A 20 ft container typically needs 1 to 2 vents.
• HEAT IN SUMMER, MOISTURE IN WINTER: Pushes hot, humid air out of storage containers, container sheds and workshops to help protect tools, equipment and stored goods from heat buildup, condensation, mold and rust.
• ALL-METAL, MADE IN USA, 5-YEAR WARRANTY: 14 gauge aluminum vent, 24 gauge steel hood, 1/8 inch pest screen. Includes 16 roofing screws with rubber washers, 16 screw caps and EPDM foam gasket. Real people answer the phone in Arizona.

ABOUT US

Welcome to our store! FAST FREE SHIPPING ON ALL PRODUCTS! Please look through our selected quality items to see if you can find what you are looking for or to discover new and exciting things. Our main goal is to bring you the best services which includes quality products at the best prices, fast free shipping and great customer support !

SHIPPING

• We ship to the Lower 48 States only (Does NOT include Hawaii or Alaska)
• We cannot ship to PO Boxes/APO's
• We cannot combine shipping.
• No Local Pickup.
• NOTE: we ship from multiple locations

We offerFREE STANDARD DELIVERY2-8 business days within USA. The item will be shipped directly from our supplier.RETURNS

We have a NO returns policy on this product, but we will make sure you receive it in perfect condition( in case of damage on arrival let us know within 2 days for a solution/replacement).

PAYMENT

We accept PayPal.

CONTACT US

This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You

CUSTOMER SATISFACTION

If you have a question about a product not otherwise answered in the item description, please contact us via messages first and allow us the opportunity to help you. Your satisfaction is our #1 priority ! In any situation before opening a case please do contact us for a resolution!!