|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Smart Console Handheld Controller Programmer OEM Level for ZAPI FC2463 FC2360
$686.75

Store CategoriesStore Categories Tester: real time display of the analogue and digital measurements in the controllers (battery voltage, motor voltage, motor current, temperature, potentiometer voltage, …) - Programming Parameters: multilevel password protected access to the controllers parameters
- Save & Restore: possibility to save a set of parameters in an external memory in order to program multiple controllers with the same set in an automated way
- Alarms display: last 5 faults / warnings
- Advanced functions: CAN messages real time data-logging on USB for system analysis; real time data-logging of I/O values shown in the tester menu Sw download for firmware upgrade
Preparing the console: put 4 NiMh AA batteries into the battery chamber; choose the serial communication cable; link the cable\'s DB15 connector to its mating part on smart console. - Connecting the smart console to controller (removing the rubber protection cover of controller\'s 8-Pin connector, and put the cable\'s serial communication connector to it).
- Preparing the DC source (voltage not higher than the rated voltage of controller), feeding power to the controller by linking the battery positive and negative to controller\'s B+ and B- terminals.
- Power on the smart console, then you\'ll see the initial interface (Home Screen) of console.
- Activating the controller: linking the DC source positive to the Pin number 1 of 12-Pin MOLEX connector.
- Choose the console menu \"RS232 Console\", press \"OK\" button, the smart console will start to communicate with the controller. When the communication is built successfully between smart console and the controller, the controller\'s model information appears.
- By pressing the \"OK\" button, you\'ll enter the controller\'s main menu. By choosing a sub-menu, you\'ll be able to modify the controller\'s parameters, diagnose the controller\'s status, check the controller\'s error, saving or restore the controller setting, etc.
Package Included: 1 x Smart Console 1 x Serial Connector 1 x DEUTSCHConnector Copyright © 2023 Dianxiaomi

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|