Sipeed Tang Nano 20K FPGA Board 🎮⚡
GOWIN GW2A-LV18 FPGA with 64Mbit SDRAM for Retro Gaming & RISC-V Linux Projects
Choosing Your Option
Tang Nano 20K: fully assembled board with headers pre-soldered, ready to plug in and use.
Nano 20K No Header: same board without soldered pin headers, for users who want to solder their own connectors or use a lower profile.
Key FeaturesPowerful GOWIN FPGA
GW2A-LV18QN88C8I7 chip with 20736 LUT4 logic units, 828K bits Block SRAM, and 48 multipliers for demanding FPGA designs.
64Mbit SDRAM Onboard
Dedicated SDRAM enables retro game core emulation, frame buffering, and video processing projects.
Multiple Video Outputs
Supports 40-pin RGB LCD connector and HDMI interface for flexible display connectivity.
RISC-V & Linux Ready
Onboard BL616 debugger and MS5351 clock generator support RISC-V soft cores and embedded Linux workloads.
SpecificationsFPGA ChipGW2A-LV18QN88C8I7Logic Units (LUT4)20736Flip-Flops (FF)15552Shadow SRAM41472 bitsBlock SRAM828K bits18x18 Multipliers48SDRAM64 MbitOnboard DebuggerBL616Clock GeneratorMS5351 (3 extra clocks for FPGA)Display Interface40-pin RGB LCD connector / HDMIAudioMAX98357A PCM amplifierStorage1x TF card slotBoard Size22.55mm x 54.04mm x 5mmProduct ImagesFAQDoes this run Linux?
Yes, the onboard architecture supports RISC-V soft cores capable of running embedded Linux.
What\'s the difference between the two variants?
The No Header version ships without soldered pin headers; the standard Tang Nano 20K comes with headers pre-soldered and ready to use.
Can I use this for retro game emulation?
Yes, the 64Mbit SDRAM and video outputs make it well suited for FPGA-based retro game core projects.
What display connections are supported?
A 40-pin RGB LCD connector and an HDMI interface are both available.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.