Shure ANI22-BLOCK

Never Used, In Original Packaging - No Refunds or Returns,PleaseAll connectors included.

• For Conferencing Applications
• Analog Block Connectors
• Converts 2 Mic/Line Signals to Dante
• Power over Ethernet (PoE)
• Compact Form Factor, Mounts Easily

TheANI22 Audio Network InterfacefromShureis designed to bring up to two line/mic signals onto or from a Dante network. It can be utilized for easy audio routing and convenient browser-based remote control. In addition, it is built with analog block connectors.

Works with Microflex Advance and Microflex Wireless systems and Dante systems2 input and 2 output analog audio connectorsConverts up to 2 mic / line analog signals onto a Dante NetworkConverts up to 2 Dante digital audio signals to line/ mic analog signalsPower over Ethernet (PoE) eliminates need for outboard power supplyCompact form factor is easy to mount without equipment rack
Shure ANI22BLOCKSpecsInputs (Analog)2 x 6-pin block connectorsOutputs (Analog)2 x 3-pin block connectorsDante Connection1 x RJ45
Channel Count: 2 inputs, 2 outputsPolarityNon-inverting, any input to any outputPower RequirementsPower over Ethernet (PoE), Class 0 (PoE Plus compatible)Power Consumption11 W maximumApplication ControlHTML5Operating Temperature Range20 to 104°F (-6.7 to 40°C)Storage Temperature Range20 to 165°F (-29 to 74°C)Thermal DissipationMaximum: 12.1 W (41.3 BTU/hr)
Typical: 9.8 W (33.7 BTU/hr)AudioFrequency Response20 Hz to 20 kHz ±1 dBDante Audio FlowsSampling Rate: 24-bit/48 kHzLatencyDoes not include Dante latency
Analog to Dante: 0.35 ms
Dante to Analog: 0.71 msAnalog Gain Range51 dB (adjustable in 3 dB steps)Dynamic Range113 dB, 20 Hz to 20 kHz, A-weighted, typicalEquivalent Input Noise20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
Analog Gain Setting = +0 dB, -93 dBV
Analog Gain Setting = +27 dB, -119 dBV
Analog Gain Settings = +51 dB, -130 dBVTotal Harmonic Distortion (THD)<0.05% @ 1 kHz, 0 dBV input, 0 dB analog gainCommon Mode Rejection Ratio>70 dB, 50 Ohms balanced source @ 1 kHzInput Impedance5 kOhmsOutput Impedance150 OhmsInput Clipping LevelAnalog Gain Setting = +0 dB, +20 dBV
Analog Gain Setting = +27 dB, -7 dBV
Analog Gain Setting = +51 dB, -31 dBVAnalog Output LevelsSelectable Line 0 dB
Aux -20 dB
Mic -46 dBDigital Signal Processing (DSP)Per Channel: Equalizer (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range)
System: Channel SummingNetworkingCat 5e or higher (shielded cable recommended)Dimensions1.6 x 5.5 x 5.0\" (4 x 14 x 12.8 cm)Weight1.5 lb (672 g)Packaging InfoPackage Weight2.7 lbBox Dimensions (LxWxH)10.1 x 6.6 x 3.3\"