Shars 4 x 4-1/8\" Lockdown CNC Milling Machine Vise Without Base NewUSE ON NC/CNC MACHINES FOR CUSTOMER WHO ONLY NEEDS ONE VISE NOT TWO OR MORE, BECAUSE OF BED HEIGHT TOLERANCE , THESE VISES CAN\'T BE USED TOGETHER.Comes with certificate
- Jaw Opening: 3.93\"
- Jaw Height: 1-1/4\"
- Weight: 32 Lbs
- Accurate to0.002”per 4” on squareness and0.006”per 4” on parallelism without base and0.008”per 4” on parallelism with base
- Vise Key: 11.11mm table slot width, 14.00mm base width
Product features
- Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt.This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.
- Highest clamping power. It\'s very accurate and durable
- Sliding surface of the vise bed is flame hardened and ground
- Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI
- Withanti-jaw lifting mechanism.K type angle lock nut is made from the highest quality ductile Iron, firmand durable
- Acme screws and easy to read 0-360 deg scales
- 4 screws from the top through the jaw reduce key\'s side force and make the vise body not easy to broke, extend vise life.
- The installation size of Soft Jaw is the same as Kurt. 4\" Aluminum Soft Jaws which are made in USA can be mounted into this vise
- Four setting positions of the jaw plates are available, widening the jaw plates opening.Four ways to use the vise, shows on the following fig.
Product application
- Jaw Plate Bolt Hole Spacing: 2.5\'\'
When A and C are unequal to E, you can swivel the vise base to suitable angle, then the vise can be installed onto the Mill.
Related products
Click the product code to the item page
4 x 2 x 1\" Aluminum Soft Jaws Pair for 4\" Milling Vise USA Made
Product Code:202-1078
We haveother vises available atMy store:
SHARS 4\" 440V Milling Vise +/-0.0004
- 4\" wide jaw plate, 4\" inner jaw opening, 10\" outer jaw opening
- Made from 80,000PSI stress relief cast iron
- Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
- Bed height Tolerance 2.25\" +/-0.0005\"
- Clamping repeatability +/-0.0004\"
- Lifetime limited warranty
- To learn more,click here to 202-0991
SHARS 6\" 690V Milling Vise +/-0.0004
- 6\" wide jaw plate, 8.95\" inner jaw opening, 17\" outer jaw opening
- Made from 80,000PSI stress relief cast iron
- Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
- Bed height Tolerance 2.875\" +/-0.0005\"
- Clamping repeatability +/-0.0004\"
- Lifetime limited warranty
- To learn more,click here to 202-0994
SHARS 6\" 660U Milling Vise +/-0.0004
- 6\" wide jaw plate, 6.25\" inner jaw opening, 15\" outer jaw opening
- Single piece of stationary jaw and vise body to enhance clamping rigidness and accuracy
- Made from 80,000PSI stress relief cast iron
- Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
- Bed height Tolerance 3.189\" +/-0.0005\"
- Clamping repeatability +/-0.0004\"
- Lifetime limited warranty
- To learn more,click here to 202-0995
SHARS 6\" 600DS Double Station Milling Vise +/-0.0002
- 6\" wide jaw plate
- 4.9\" jaw opening in double station, 12\" jaw opening in single station (conversion kit included)
- Unique leadscrew design to allow to clamp either same sized or dissimilar sized parts
- Jaw lift prevention mechanism by eccentric pin design
- Made from 80,000PSI stress relief cast iron
- Vise bed hardened to 45 HRc and jaw plate hardened to 54 HRc
- Bed height Tolerance 3.25\" +/-0.0005\" (matched bed height at no additional cost)
- Clamping repeatability +/-0.0002\"
- Lifetime limited warranty
- To learn more,click here to 202-0999
All Available to Ship NOW! at Fixed Prices
SHIPPING: UPS Ground
Buyer paysACTUAL UPS shipping & insurance, and a $3.00 handling feefor this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other sales or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package\'s recipient may need to pay these to clear customs.
If you need to speak to a sales person feel free to call. We are open Monday through Friday 8:30 to 5:00 central. Phone: 1-630-443-3244
Email:
[email protected] PAYMENT:
We accept : VISA, Master, Discover, American Express and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller\'s discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.
Any questions regarding our tools, feel free to email us at [email protected]
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.