Semroc Flying Model Rocket Kit Pro Cherokee™ SEM-KP-01

Semroc Flying Model Rocket Kit Pro Cherokee™ SEM-KP-01

Skill Level Pro

200% Up Scale

Plastic Nose Cone

Laser-Cut Plywood Fins

Slotted Body Tubes for thru the wall construction

Rail Buttons

Screw on Motor Retention

Vinyl Decals by Stickershock with options to name it how you want it with motor sizes

18\" Red Rip Stop Nylon Parachute

Body Diameter 2.64\"(5.7cm)

Length 43.5\" (115.6cm)

Fin Span 10.5\" (16.5cm)

Net Weight 19.5oz (246.8g)

Engine Approx. Altitude

F27-4R 840\'

F67-6W 1100\'

G64-7W 1900\'

H115DM-8 2400\'

PDF Instructions

Model Rocket Kits are rated by Skill Level

1 Beginner

2 Intermediate

3 Advanced

4 Expert

5 Master

Pro for larger motors

If you are just starting in the hobby start at the beginner level and move up from there at your own pace.

What is needed to build and fly

All model rockets come in kit form that require assembly. The materials areprimarily cardboard tubes, balsa or plastic fins and nose cone. Materialswill vary by model and are typically specified in the description of each kit.

Additional supplies will be necessary to build and finish your model rocket kit and may include:

Scissors, Hobby Knife

Ruler

Wood Glue, Model Cement or CA(Super Glue)

Sandpaper

Masking Tape

FinishingSupplies like:

Wood Filler

Sealer/Primer

Paint

Launching Equipment and Supplies like:

Recovery wadding

Launch Pad

LaunchController

Power supply

Model Rocket Motors and Igniters

A safe place to fly using guidelines from the National Association of Rocketry Safety Code