This is a Schneider Electric Modicon TM5NEIP1K bus interface module kit for Ethernet/IP communications. It includes everything shown in the pictures:
- TM5NEIP1 comms module,
- TM5ACBN1 DIN rail bus base,
- TM5SPS3 power distribution module, and
- TM5ACTB12PS spring terminal block.
This module was purchased from an authorized distributor and used briefly in an attempt to add remote I/O to a Schneider Electric M258 PLC as that device also is based on the TM5 slice I/O system, but as it turns out, that specific PLC cannot communicate over Ethernet/IP per Schneider technical support. It was powered for approximately two hours at +24VDC when first purchased while communications were attempted with it. It will likely work with other Ethernet/IP-enabled PLCs such as the Schneider M241, M251, M262, and others.
The Schneider catalog is one of the better sources of information for this unit. Search for catalog DIA3ED2131204EN.
This unit does not come with the factory packaging or paperwork, but powers up as shown in the pictures. The serial number and MAC address has been covered with bits of tape to prevent nefarious use online, but the tape will be removed prior to shipment.
From the Schneider Electric website:
This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This is a bus coupler designed for creating distributed IO islands on Ethernet network, exchanging data between controller and distributed IO. It has an embedded Web server, an embedded cybersecurity (Achilles L1) and user access rights management via a Web server. This is a bus coupler module designed for creating distributed IO islands on the Ethernet network.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.