Sansui 5000 Complete Rebuild Kit High-Quality Receiver Recap Transistors
$140.00

Up for sale here is this rebuild kit for the Sansui 5000 receiver. This includes all the parts you need to rebuild a Sansui 5000, and includes the correct size replacement main filter capacitors. This is not for the 5000A or 5000X, just the model 5000. This does not include new lights or fuses. This also does not include the driver or output transistors. Correct replacement outputs are four MJ21196G, availablehere.Please don\'t buy any of the Chinese transistors on --those are counterfeit and may blow up.
This kit includes replacements for all the electrolytic capacitors in the receiver, including the five large chassis-mount capacitors, which are replaced with 4 new Epcos 3300 uf 100v capsand one 1200 uf 100v cap.The new caps are the same diameter as the old ones so they will fit the old clamps perfectly. The kit also includes replacements for almost all the transistors on all the boards except the tuner board. Transistors frequently age worse than the capacitors, so you have to replace them when you\'re doing a rebuild. Replacements for the driver board trimmers and a number of diodes are also included.
There are two different versions of driver boards in the 5000--some have the older F-1040 boards and some have the newer F-6013 boards. This kit comes with parts to rebuild the F-1040 boards by default, but I can swap those out for the parts to completely rebuild the F-6013 boards if you have those, just let me know.This includes a full F-1040 rebuild kit, so you can update your F-1040 boards to work safely.
These are all high-quality brand new genuineparts, the same ones I use when I rebuild vintage equipment. Capacitors are Nichicon PW, Nichicon KL, Panasonic FC, Wima film, Kemet, and Epcos for the chassis-mount caps. Transistors and diodes are Fairchild/Onsemi.
This kit includes a total of 125 parts. The parts for each board are individually bagged for ease of installation, and the instructions will tell you how the transistors and diodes go in, but there are a LOT of parts to replace here, so if you do not have a lot of experience with vintage gear I would not recommend starting with this one. You should know what you\'re doing and have a decent soldering iron, heat-sink compound, and a dim-bulb tester with 60W or 100W incandescent bulb. I would recommend a a desoldering gun such as a Hakko FR-301, but it\'s not absolutely necessary.
US shipping and handling is $10, and international is $36. If you have any questions, please ask.
Looking for more parts? I have power switches, feet, pushbuttons,top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use \"add to cart\" on everything you want and then check out for combined shipping.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.