Sansui 3000A Complete Rebuild Kit High-Quality Receiver Recap Transistors
$175.00

Up for sale here is this rebuild kit for the Sansui 3000A receiver. This includes replacements for all electrolytic capacitors in the 3000A (including the clamp-mounted caps), as well as replacements for the 5 oil caps and the 2 safety caps, and replacements for 5 Mylar caps. It also includes replacements for almost all the transistors (except tuner board transistors and the outputs). The 3000A has a service bulletin to correct a design flaw, and this kit includes parts to fully implement the service bulletin. I sell a separate Sansui 3000A repair kit, but the parts for that are all included in this complete kit, so if you buy this kit you do not need the separate repair kit.This does not include output transistors or lights. If you need new output transistors, the correct replacements are four MJ21196G and are available here. This kit includes the following:
Power Supply:
15 capacitors (Nichicon PW, Supertech axial, Kemet safety discs)8 diodes1 transistor (Fairchild/Onsemi)4 fuses (for service bulletin)
Driver/Pre-power boards:
10 capacitors (Nichicon PW)8 transistors (Toshiba, Fairchild/Onsemi)
8 diodes4 trimmers (Bourns)Service Bulletin:
10 capacitors (Nichicon VP bipolar, Panasonic film)8 resistors2 clamps4 screws2 nuts/bolts2 transistors (Onsemi)
Phono:
12 capacitors (Nichicon PW, Nichicon KL)4 transistors (Fairchild/Onsemi)Control:
22 capacitors (Nichicon PW, Wima film, Supertech film)
8 transistors (Fairchild/Onsemi)
Tuner boards:
28 capacitors (Nichicon PW, Nichicon KL)3 transistors (Fairchild/Onsemi)
Main capacitors:
5 main capacitors (Epcos/TDK, the exact correct size for the original clamps)
Instructions
These are extremely high-quality genuine parts, and they are what I use when I rebuild Sansui equipment. The transistors are the correct subs for the originals, and the capacitors are the same capacitance (uf) and the same or higher voltage, except a few go up slightly.
This kit took an incredible amount of effort to put together, and it is unbelievably better than any other similar kit on . This has 166 parts in it, which is NUTS.I will include surprisingly well-written instructions, but this is pretty complicated, and you should know what you\'re doing and have a decent soldering iron and a dim-bulb tester with 60W, 75W, or 100W incandescent bulb. Please see my pictures for details.
US shipping and handling is $10, and international is $36. If you have any questions, please ask.
Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 13 different values, a large variety of transistors for vintage stereo repair, and more. Just use \"add to cart\" on everything you want and then check out for combined shipping.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.